| 提高深孔类钎焊件钎透率的研究 |
| |
| 引用本文： | 唐德再,肖东明,迟长志.提高深孔类钎焊件钎透率的研究[J].辽宁工程技术大学学报(自然科学版),1994(3). |
| |
| 作者姓名： | 唐德再 肖东明 迟长志 |
| |
| 作者单位： | 阜新矿业学院热加工中心实验室，阜新矿业学院热加工教研室 |
| |
| 摘 要： | 本文针对４５＃钢与ＹＧＢＣ硬质合金深孔钎焊接头缺陷进行实验研究和分析．提出在钢套内表面开设纵向排渣槽、以减少截齿钎焊的缺陷．从而提高钎透率的方法。
|
| 关 键 词： | 钎焊 钎透率：抗剪强度 |
Study on the Brazing Rate of Deep Hole Workpiece |
| |
| Tang Dezai, Xiao Dongming, Chi Changzi.Study on the Brazing Rate of Deep Hole Workpiece[J].Journal of Liaoning Technical University (Natural Science Edition),1994(3). |
| |
| Authors: | Tang Dezai Xiao Dongming Chi Changzi |
| |
| Institution: | Tang Dezai; Xiao Dongming; Chi Changzi |
| |
| Abstract: | This paper deals with the defect of welded splice both 45# steel and YG13C cemented carbide brazed in deep hole case. In order to increase the brazing rate,cutting vertical slagging groove on internal surface of steel jacket is put forward,which can reduce the defect of brazing cutter pick. |
| |
| Keywords: | brazing: brazing rate shear strength |
| 本文献已被 CNKI 等数据库收录！ |
