| 电弧喷锌工艺参数的选择 |
| |
| 引用本文： | 唐德再,贾世坤,肖东明.电弧喷锌工艺参数的选择[J].辽宁工程技术大学学报(自然科学版),1995(3). |
| |
| 作者姓名： | 唐德再 贾世坤 肖东明 |
| |
| 作者单位： | 阜新矿业学院机械一系 |
| |
| 摘 要： | 本文主要论述了电弧喷锌工艺参数对喷锌质量的影响，并确定出最佳工艺参数．从而提高了电弧喷锌的结合强度．
|
| 关 键 词： | 电孤喷涂，结合强度，气孔率，粗糙处理，电弧电流 |
The Selection of the Technological Parameter of Arc Spraying Zinc |
| |
| Tang Dezai, Jia Shikun, Xiao Dongming.The Selection of the Technological Parameter of Arc Spraying Zinc[J].Journal of Liaoning Technical University (Natural Science Edition),1995(3). |
| |
| Authors: | Tang Dezai Jia Shikun Xiao Dongming |
| |
| Abstract: | This article mianly discusses the effect of the technological parameter on the quality of arc spraying zinc. In the meantime, the best technological parameter has been determined and so the link strength of the arc spraying zinc can be raised. |
| |
| Keywords: | arc spraying link strength percenptage of air hole roughing treatment arc current |
| 本文献已被 CNKI 等数据库收录！ |
