| 35CrMnSi纲与YG13C硬质合金钎焊强度的研究 |
| |
| 引用本文： | 肖东明,唐德再,仲伟深,迟长志.35CrMnSi纲与YG13C硬质合金钎焊强度的研究[J].辽宁工程技术大学学报(自然科学版),1990(3). |
| |
| 作者姓名： | 肖东明 唐德再 仲伟深 迟长志 |
| |
| 作者单位： | 阜新矿业学院热加工教研室
(肖东明，唐德再，仲伟深)，阜新矿业学院热加工教研室(迟长志) |
| |
| 摘 要： | 本文通过对35CMnSi钢与YG13C硬质合金不同组合钎接接头的强度分析,找出了影响钎焊强度的原因,提高钎焊强度的途径,确定了在一定工艺条件下获得最佳钎焊接头的钎焊温度,钎剂成分和焊后冷却方式等工艺参数。
|
| 关 键 词： | 抗弯强度 残余应力 冷却速度 撕裂 |
STUDING PRARING STRENGTH OF 35CrMnSi STEEL AND YG13C HARD ALLOY |
| |
| Xiao Dongning Tang Dezai Zhong Weishen Chi Chungzhi.STUDING PRARING STRENGTH OF 35CrMnSi STEEL AND YG13C HARD ALLOY[J].Journal of Liaoning Technical University (Natural Science Edition),1990(3). |
| |
| Authors: | Xiao Dongning Tang Dezai Zhong Weishen Chi Chungzhi |
| |
| Institution: | Xiao Dongning Tang Dezai Zhong Weishen Chi Chungzhi |
| |
| Abstract: | By strength analysis of various combined brazing joints of 35CrMnSi steel and YG13C hard alloy, the causes influcing the brazing strength and methods to improve the brazing strength are songht in this investigation and the process parameters with which the optimal brazing joints can be obtained on certain process conditions, such as brazing temperature, flux composion and cooling method ofter brazing are also determined |
| |
| Keywords: | bending strength residual stress cooling rate tear |
| 本文献已被 CNKI 等数据库收录！ |
