| 制备及处理工艺对Cu/WC复合材料性能的影响 |
| |
| 引用本文： | 陈民芳,赵乃勤,由臣,夏立明,李国俊.制备及处理工艺对Cu/WC复合材料性能的影响[J].天津理工大学学报,2003,19(1):58-61. |
| |
| 作者姓名： | 陈民芳 赵乃勤 由臣 夏立明 李国俊 |
| |
| 作者单位： | 1. 天津理工学院,材料科学与工程系,天津,300191
2. 天津大学,天津,300072 |
| |
| 摘 要： | 对采用粉末冶金法制备的Cu/WC复合材料分别进行复压、轧制和热挤压、冷拔等处理 ,研究表明这些工艺均可不同程度地改善WC颗粒的分布 ,提高烧结体的密度、硬度和导电性 ,特别是拉伸断裂强度的增加尤为显著 .文中借助扫描电镜照片重点分析了不同工艺状态下拉伸断口的形貌和强度增加的原理 ,探讨了Cu/WC复合材料可能的断裂机理 .
|
| 关 键 词： | 复合材料 复压-轧制 热挤压-冷拔 断口 |
| 文章编号： | 1004-2261(2003)01-0058-04 |
| 修稿时间： | 2002年9月24日 |
Effect of preparation and treatment technique on properties of Cu/WC composite |
| |
| CHEN Min-fang ,ZHAO Nai-qin ,YOU Chen ,XIA Li-ming ,LI Guo-jun.Effect of preparation and treatment technique on properties of Cu/WC composite[J].Journal of Tianjin University of Technology,2003,19(1):58-61. |
| |
| Authors: | CHEN Min-fang ZHAO Nai-qin YOU Chen XIA Li-ming LI Guo-jun |
| |
| Institution: | CHEN Min-fang 1,ZHAO Nai-qin 2,YOU Chen 1,XIA Li-ming 1,LI Guo-jun 2 |
| |
| Abstract: | In this work, the Cu/WC composite materials prepared by general metallurgy are treated with repression, rolling and cold isostatic pressing-sintering-hot extrusion-cold drawing separately. Our study has shown that these treatment techniques are effective to improving disparity of WC particles, increasing properties of Cu/WC material such as density, hardness and strength. At the same time, the fractographs in the different techniques are analyzed. Furthermore, mechanism of possible fracture and strength increase in Cu/WC composite materials are approached as well. |
| |
| Keywords: | Cu/WC composite materials repression-rolling hot extrusion-cold draw fracture |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
