| 不锈钢A-TIG焊的活性剂研制 |
| |
| 引用本文： | 张瑞华,樊丁,尹燕.不锈钢A-TIG焊的活性剂研制[J].兰州理工大学学报,2002,28(1):7-9. |
| |
| 作者姓名： | 张瑞华 樊丁 尹燕 |
| |
| 作者单位： | 甘肃工业大学,材料科学与工程学院,甘肃,兰州,730050 |
| |
| 摘 要： | 针对304不锈钢研制了由B_2O_3,MnO,Fe_2O_3,Al_2O_3,SiO_2,TiO_2,Cr_2O_3和NaF等组成的A-TIG焊活性剂.分析了各单一活性剂对焊接熔深的影响规律,在此基础上结合304不锈钢的合金元素系统,确定了活性剂的基本组成成分.利用正交试验法对多组元配方进行了研究,得出了各组元质量分数变化对焊接熔深的影响规律,所得到的配方可使焊接熔深增加2倍多,并将8 mm厚的不锈钢钢板对接一次焊透.
|
| 关 键 词： | A-TIG焊 活性剂 研制 焊接熔深 |
| 文章编号： | 1000-5889(2002)01-0007-03 |
| 修稿时间： | 2001年7月16日 |
Development of activating flux of A-TIG welding for stainless steel |
| |
| ZHANG Rui-hua,FAN Ding,YIN Yan.Development of activating flux of A-TIG welding for stainless steel[J].Journal of Lanzhou University of Technology,2002,28(1):7-9. |
| |
| Authors: | ZHANG Rui-hua FAN Ding YIN Yan |
| |
| Abstract: | A kind of activating flux composed of B2O3, B_2O_3,MnO,Fe_2O_3,Al_2O_3,SiO_2,TiO_2,Cr_2O_3 and NaF for welding of stainless steel is developed. The influencing pattern of individual component on the penetration of weld is analyzed also. Based on the above investigation and the feature of alloy element system of stainless steel, the prime composition of activating flux is determined. The multicomponent formula is derived by using the method of crosscut experiment , by which the plates of 8 mm thick can be weld in a single pass without groove preparation. the penetration has been doubled or even more. |
| |
| Keywords: | A-TIG welding activation flux development welding penetration |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
