| 铝合金薄壁方管在轴向载荷作用下力学行为研究 |
| |
| 引用本文： | 车洪艳,乔及森,陈剑虹.铝合金薄壁方管在轴向载荷作用下力学行为研究[J].兰州理工大学学报,2005,31(4):6-9. |
| |
| 作者姓名： | 车洪艳 乔及森 陈剑虹 |
| |
| 作者单位： | 1. 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050
2. 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050;兰州理工大学,甘肃省有色金属新材料国家重点实验室,甘肃,兰州,730050 |
| |
| 基金项目： | 国家自然科学基金（2004CCA04900） |
| |
| 摘 要： | 采用常规的实验方法获得材料的基本力学性能，如弹性模量、泊松比、流变应力等（为FEM提供数据），在一定的条件下，对薄壁方管进行轴向压缩实验，运用Abaqus6.4对其压缩过程进行模拟，研究结果表明，仿真过程中边界条件的设定对仿真结果的影响最大，网格疏密会影响到计算精度，但对最终的结果影响不大，通过比较仿真和实物实验的结果，验证了模型建立的可靠性，并改进和优化了实物实验模型。
|
| 关 键 词： | 铝合金 薄壁方管 压缩 有限元方法 |
| 文章编号： | 1000-5889(2005)04-0006-04 |
| 收稿时间： | 2004-09-21 |
| 修稿时间： | 2004年9月21日 |
Study of mechanical behavior of aluminum alloy tube with square cross-section and thin wall under axial loading |
| |
| CHE Hong-yan,QIAO Ji-sen,CHEN Jian-hong.Study of mechanical behavior of aluminum alloy tube with square cross-section and thin wall under axial loading[J].Journal of Lanzhou University of Technology,2005,31(4):6-9. |
| |
| Authors: | CHE Hong-yan QIAO Ji-sen CHEN Jian-hong |
| |
| Abstract: | The basic mechanical properties of Al-alloy 6063 such elastic modulus, poisson ratio, and rheologic stress were obtained by conventional zest. which offer the data for FEM. Under certain condition, axial compressing were applied onto the squared tube with thin wallo The course of compression is simulated with ABAQUS 6.4. The result showed that the setting of boundary condition has the greatest effect on test result and the mesh density has an effect on the precision of calculation but less effect on the final test result. Compared the result of simulation to the practical experiment, the reliability of the model developed was validated and,at the same time, the practical experimental model was improved and optimized. |
| |
| Keywords: | Al-alloy thin walled tube compression FEM |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
