| 基于VERICUT的离心式叶轮五轴粗加工刀路优化及仿真 |
| |
| 引用本文： | 许晓光,鹿启栋.基于VERICUT的离心式叶轮五轴粗加工刀路优化及仿真[J].科技信息,2013(11):83-84,113. |
| |
| 作者姓名： | 许晓光 鹿启栋 |
| |
| 作者单位： | [1]中国空空导弹研究院,河南洛阳471009 [2]上海航天精密机械研究所,中国上海201600 |
| |
| 摘 要： | 为提高离心式叶轮叶片的加工质量和效率,在粗加工阶段,通过考虑叶轮粗加工路径规划策略、刀具轴向规划方式以及碰撞检测与修正方法,提出离心式叶轮五轴粗加工优化。最后以具体叶轮为例,采用UG NX4.0进行建模与数控编程,经过Vericut分析并进行刀轨优化及仿真,通过加工路径的比较,对加工效率进行量化分析,结果证实了数控加工程序在后能大大地提高效率,并且能有效地指导编程员采用最合理的加工参数,服务于实际生产。
|
| 关 键 词： | 离心式叶轮 五轴数控加工 粗加工优化 Vericut 仿真 |
Simulating Optimization Research on 5-axis NC Rough Machining Tool path of Centrifugal Blade Based on VERICUT |
| |
| XU Xiao-guang,LU Qi-dong.Simulating Optimization Research on 5-axis NC Rough Machining Tool path of Centrifugal Blade Based on VERICUT[J].Science,2013(11):83-84,113. |
| |
| Authors: | XU Xiao-guang LU Qi-dong |
| |
| Institution: | 2 (1.CAMA Measurement ＆ Controls Co., Ltd. Luoyang Henan, 471009; 2.Shanghai Aerospace Precision Machinery Research Institute, Shanghai, 201600, China) |
| |
| Abstract: | In order to improve the quality and efficiency of centrifugal blade in stage of rough milling, this article will provide an optimal rough milling method, which focus on the tool path planning of the centrifugal blade rough milling, the planning of tool axis direction, the rule and revision rule of collision and checking. The NC programming and CAD model was built by UG NX4.0 and simulating and analyzing by VERICUT. The results show this optimal method can give much better quality and greater efficiency than the traditional manufacturing method by Vericut optimization,and it can effectively help programmer to use the optimal parameters, and then serve to the real manufacture. |
| |
| Keywords: | Centrifugal blade 5-axis NC Machining Rough optimization Vericut Simulation |
| 本文献已被 维普 等数据库收录！ |
|
