| 挤压铸造对Al_2O_3／Al－Si合金复合材料组织与性能的影响 |
| |
| 引用本文： | 马泗春,张强.挤压铸造对Al_2O_3／Al－Si合金复合材料组织与性能的影响[J].西安理工大学学报,1995(2). |
| |
| 作者姓名： | 马泗春 张强 |
| |
| 作者单位： | 西安理工大学材料工程系 |
| |
| 摘 要： | 采用挤压铸造法制取了Ａｌ２Ｏ３颗粒增强的Ａｌ－Ｓｉ合金复合材料。探讨了挤压压力、浇注温度对Ａｌ２Ｏ３／Ａｌ－Ｓｉ复合材料强度的影响，优化了工艺参数。对压力下凝固的材料组织的分析表明，压力和颗粒能使初晶硅和共晶硅双细化，并改变了初晶硅和共晶硅的形貌。
|
| 关 键 词： | 挤压铸造，Al_2O_3颗粒Al－Si合金金，属基复合材料，组织，性能 |
Influence of Squeezing Casting Technique on Microstructure and Mechanical Property of the Al_2O_3/Al-Si Alloy Composite |
| |
| Ma Sichun,Zhang Qiang.Influence of Squeezing Casting Technique on Microstructure and Mechanical Property of the Al_2O_3/Al-Si Alloy Composite[J].Journal of Xi'an University of Technology,1995(2). |
| |
| Authors: | Ma Sichun Zhang Qiang |
| |
| Abstract: | With the Al2O3/Al-Si composite samples made by squeezing casting,the authors have investigated the influence of squeezing temperature and pressure on the composite strength and thus optimized the casting process parameters.According to the analysis on microstructure of the composite solidified under pressure,it is discovered that Al2O3 grains and squeezing pressure will cause both primary and eutectic silicon to be finer and change their microstructure morphology. |
| |
| Keywords: | squeezing casting Al_2O_3 grain Al-Si alloy metal-based compositemicrostructure mechanical property |
| 本文献已被 CNKI 等数据库收录！ |
