|
|||||
|
|
| 变密度Ti-Sc系梯度材料的制备 | |
| 引用本文： | 邓承继,白晨,张联盟,袁润章.变密度Ti-Sc系梯度材料的制备[J].武汉科技大学学报(自然科学版),2005,28(3):228-230. |
| 作者姓名： | 邓承继 白晨 张联盟 袁润章 |
| 作者单位： | 1. 武汉科技大学,湖北,武汉,430081;武汉理工大学,湖北,武汉,430070 2. 武汉科技大学,湖北,武汉,430081 3. 武汉理工大学,湖北,武汉,430070 |
| 基金项目： | 武汉市“晨光计划”资助项日（20035002016-14） |
| 摘 要： | 经过1473K-30MPa-2h真空热压烧结制备得到不同Ti和Sc比例的合金材料。同时还制备了在厚度方向密度；位连续变化，密度从3．0到4．5g／cm^3的Ti—Sc系梯度材料，、金属Mg可以显著提高Ti—Sc合金及其梯度材料的密度．EPMA＋EDS观察了材料的显微结构及成分分布。 |
| 关 键 词： | Ti-Sc系 梯度材料 变密度 制备 |
| 文章编号： | 1672-3090(2005)03-0228-03 |
| 收稿时间： | 2005-04-27 |
| 修稿时间： | 2005年4月27日 |
Fabrication of Ti-Sc System FGM with Density Gradient |
|
| DENG Cheng-ji,BAI Chen,ZHANG Lian-meng,YUAN Run-zhang.Fabrication of Ti-Sc System FGM with Density Gradient[J].Journal of Wuhan University of Science and Technology(Natural Science Edition),2005,28(3):228-230. | |
| Authors: | DENG Cheng-ji BAI Chen ZHANG Lian-meng YUAN Run-zhang |
| Abstract: | Ti-Sc alloys of different designed ratio were hot-press sintered at 1 473 K under the pressure of 30 MPa for two hours in a vacuum furnace. Ti-Sc FGM whose density changes quasi-continuously from 3.0 g/cm~(3) to 4.5 g/cm~(3) in the thickness direction was obtained under the same experimental conditions. Mg additive can greatly increase the densities of Ti-Sc alloys. The microstructures of Ti-Sc FGM and Ti-Sc alloys were investigated by means of EPMA EDS. |
| Keywords: | Ti-Sc system FGM density gradient fabrication |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |