| 激光熔覆层网状添加物对裂纹控制的影响 |
| |
| 引用本文： | 毛怀东,张大卫,刘泽福.激光熔覆层网状添加物对裂纹控制的影响[J].天津大学学报(自然科学与工程技术版),2008,41(5):553-557. |
| |
| 作者姓名： | 毛怀东 张大卫 刘泽福 |
| |
| 作者单位： | [1]天津大学机械工程学院,天津300072 [2]天津市博技机电科技有限公司,天津300072 |
| |
| 摘 要： | 激光熔覆是新型表面强化技术，但熔覆层裂纹是限制其应用的主要难题．在熔覆层中加入不锈钢网，降低了熔覆层中的应力值，控制了熔覆层中的裂纹．对3种熔覆材料的实验验证了网丝的加入能有效地降低熔覆层的裂纹率．金相分析显示，随着网丝直径的增大，熔覆层中网丝未完全熔解，它与熔覆材料、基体形成冶金结合，保证了熔覆层的完整性，有效地控制了熔覆层的裂纹．实验工艺显示，对Ni45和Co02这2种粉末，在基体不预热的情况下，这项工艺技术可得到无裂纹的大面积熔覆层．
|
| 关 键 词： | 激光熔覆 熔覆层 不锈钢网 裂纹率 |
Influence of Stainless Steel Net on Crack Control in Laser Clad Layer |
| |
| MAO Huai-dong,ZHANG Da-wei,LIU Ze-fu.Influence of Stainless Steel Net on Crack Control in Laser Clad Layer[J].Journal of Tianjin University(Science and Technology),2008,41(5):553-557. |
| |
| Authors: | MAO Huai-dong ZHANG Da-wei LIU Ze-fu |
| |
| Institution: | MAO Huai-dong, ZHANG Da-wei, LIU Ze-fu ( 1. School of Mechanical Engineering, Tianjin University, Tianjin 300072, China; 2. Tianjin Boji Mechatronic Technology Co Ltd, Tianjin 300072, China ) |
| |
| Abstract: | Laser cladding is a new technique which can improve coating property. Crack in laser clad layer is the most difficult problem that frustrates wide application in engineering. Through adding a stainless steel net in clad layer, the stress and crack of clad layer can be reduced. It is proved that stainless net can reduce the crack ratio of clad layer by laser cladding experiment on three sorts of materials. The steel wire in clad layer would not be melted completely in the metalloscopy as the diameter of wire increased. The wires bond with cladding material and substrate properly which can decrease crack ratio. Utilizing the technique, large area cladding layers of Ni45 and Co02 were obtained without warming the substrate, |
| |
| Keywords: | laser cladding clad layer stainless steel net crack ratio |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
