首页 | 本学科首页   官方微博 | 高级检索  
     检索      

双炉膛直流炉蒸发系统的分布参数建模
引用本文:罗自学,闫晓沛,郑树,周怀春.双炉膛直流炉蒸发系统的分布参数建模[J].华中科技大学学报(自然科学版),2011(3):120-123.
作者姓名:罗自学  闫晓沛  郑树  周怀春
作者单位:华中科技大学煤燃烧国家重点实验室;
基金项目:国家自然科学基金资助项目(51076049,51025622,50721005)
摘    要:通过建立双炉膛内水冷壁二维表面非均匀蒸发系统模型,利用炉膛三维温度场可视化检测系统获得的炉内实时烟气温度分布,研究双炉膛直流锅炉蒸发受热面的分布参数变化规律.提出用假想受热面处理双面水冷壁的方法,仿真研究证明了模型的正确性.双炉膛直流锅炉现场实测参数的模型检验表明:在90%负荷下前墙靠双面水冷壁附近角的壁温高于边缘处的壁温,计算的质量流量与设计值最大误差为8.56%,理论推算与电厂实际运行结果较一致.

关 键 词:电站直流锅炉  蒸发系统  分布参数  双炉膛  建模

Modeling distributed parameters in evaporation system with twin-furnace once-through boiler
Luo Zixue Yan Xiaopei Zheng Shu Zhou Huaichun.Modeling distributed parameters in evaporation system with twin-furnace once-through boiler[J].JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE,2011(3):120-123.
Authors:Luo Zixue Yan Xiaopei Zheng Shu Zhou Huaichun
Institution:Luo Zixue Yan Xiaopei Zheng Shu Zhou Huaichun(State Key Laboratory of Coal Combustion,Huazhong University of Science and Technology,Wuhan 430074,China)
Abstract:Model of non-uniformly distribution in two-dimensional surfaces of water-wall tubes was established by the real-time 3D temperature distribution,and the variation of evaporation system with distributed parameters in a twin-furnace once-through boiler was determined by using the visualization of monitoring combustion.The imaginary wall surface was put forward to simplify the twin-furnace problem,and the correctness of the method was proved by the simulation.The results show that the metal temperature close t...
Keywords:utility once-through boiler  evaporation system  distributed parameter  twin-furnace  modeling  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号