| 异形长轴工件系统的有限元模态分析 |
| |
| 引用本文： | 柯石求,吴雅,刘经燕,杨叔子.异形长轴工件系统的有限元模态分析[J].华中科技大学学报(自然科学版),1991(Z2). |
| |
| 作者姓名： | 柯石求 吴雅 刘经燕 杨叔子 |
| |
| 作者单位： | 华中理工大学机械工程一系
(柯石求，吴雅，刘经燕)，华中理工大学机械工程一系(杨叔子) |
| |
| 摘 要： | 本文用有限元方法对曲轴工件系统进行了模态分析,求出了前六阶模态参数.并结合激振实验和切削实验揭示了生产实际中加工曲轴时端面跳动量超差的原因,还说明当进给量较大时异形长轴工件系统是整个加工系统中的最薄弱环节.
|
| 关 键 词： | 曲轴 工件系统 有限元法 模态分析 频谱分析 |
A Modal Analysis for a Special-Shaped Long Shaft Workplace System by the Finite Element Method |
| |
| Ke Shiqiu Wu Ya Liu Jingyan Yang Shuzi.A Modal Analysis for a Special-Shaped Long Shaft Workplace System by the Finite Element Method[J].JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE,1991(Z2). |
| |
| Authors: | Ke Shiqiu Wu Ya Liu Jingyan Yang Shuzi |
| |
| Institution: | Ke Shiqiu Wu Ya Liu Jingyan Yang Shuzi |
| |
| Abstract: | A modal analysis using the finite element method is carried out for a crankshaft workpiece system. Six lowest order modal'parameters have been obtained. From the results of exciting and cutting experiments and an analysis of the vibration source, it has been found that the main frequency of vibration is the first-order modal natural frequency of the workpiece system when the type Mx-4 lathe is in a normal state. It is obvious that the dominant axial deformation of the first-order modality plays an important role in the overproof of end face runout during the machining of crankshafts. Measures to improve the runout are suggested. These measures have been taken by the Second Automobile Works of China and satisfactory results are reported. The reason why the vibration and noise are not so serious during the machining of steel crankshafts in other countries with the same kind of machine tool is discussed. |
| |
| Keywords: | Crankshaft Workpiece system Finite element method Modal analysis Spectrum analysis |
| 本文献已被 CNKI 等数据库收录！ |
