首页 | 本学科首页   官方微博 | 高级检索  
     检索      

结晶对异氰酸酯反应型热熔胶固化的控制作用
引用本文:崔燕军,洪玲,王新灵,唐小真.结晶对异氰酸酯反应型热熔胶固化的控制作用[J].上海交通大学学报,2002,36(5):706-710.
作者姓名:崔燕军  洪玲  王新灵  唐小真
作者单位:上海交通大学,化学化工学院,上海,200240
摘    要:为深入探讨结晶在异氰酸酯类热熔胶中所起的作用,合成了不同结晶含量的异氰酸酯反应型热熔胶(RHMA),对固化前后不同结晶度预聚物的微结构表征和粘接性能进行了研究,结果表明:预聚物结晶形态为球晶;较高结晶度的RHMA表现出较高的初粘性能,结晶结构对湿气在热熔胀中的扩散有阻碍作用,从而可以控制RHMA的后固化反应速率,结晶含量高的RHMA后固化速率较慢,达到最大的后固化强度需要20d甚至更长的时间,后固化交联体系的WAXD谱图中仍然可以看到结晶的衍射峰,随着固化反应的进行,局部的交联反应使结晶度逐渐减小,但在后固化的聚氨酯脲结构中结晶结构始终存在,因此,结晶锻段对初粘性能和RHMA的后固化性能有较大的贡献。

关 键 词:异氰酸酯  反应型热熔胶  结晶度  初粘性能  聚氨酯脲
文章编号:1006-2467(2002)05-0706-05
修稿时间:2001年6月20日

Curing Control of Isocyanate RHMA by Crystalline Structure
CUI Yan\|jun,HONG Ling,WANG Xin\|ling,TANG Xiao\|zhen.Curing Control of Isocyanate RHMA by Crystalline Structure[J].Journal of Shanghai Jiaotong University,2002,36(5):706-710.
Authors:CUI Yan\|jun  HONG Ling  WANG Xin\|ling  TANG Xiao\|zhen
Abstract:Isocyanate end capped reactive hot melt adhesives (RHMA) were prepared based on poly(hexanediol adipate) (PHA)/poly(diethylene glycol adipate) (PDEA) and methylene di p phenyl diisocyanate (MDI). The crystal form of both oligoester and RHMA prepolymers are spherulites. RHMAs with higher PHA content exhibit better green shear strength but slower adhesion development. The crystallinities of RHMAs decreases while the formation of crosslinking structure between the interfaces of crystalline units. The DSC and WAXD results show that there is crystalline structure in the post cured polyurethane urea crosslinking system.
Keywords:isocyanate  reactive hot melt adhesive(RHMA)  crystallinty  green strength  polyurethane  urea
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号