| 熔焊成型中堆积轨迹对成型质量的影响 |
| |
| 引用本文： | 胡华,张华,李玉龙,徐健宁,张光云.熔焊成型中堆积轨迹对成型质量的影响[J].上海交通大学学报,2008(Z1). |
| |
| 作者姓名： | 胡华 张华 李玉龙 徐健宁 张光云 |
| |
| 作者单位： | 南昌大学机电工程学院 |
| |
| 摘 要： | 首先分析熔焊成型零件存在的缺陷,提出了熔焊件表面成型质量评价指标.在焊接工艺参数和路径间距相同的情况下,采用不同的堆积轨迹进行薄板熔焊成型实验,分析轨迹对薄板熔焊成型表面成型质量的影响,从而选择合适的堆积轨迹.
|
| 关 键 词： | 熔焊成型 表面成型质量 堆积轨迹 |
The Influence of Deposit Trajectories on Molding Quality in the Rapid Prototyping Based Welding |
| |
| HU Rong-hua,ZHANG Hua,LI Yu-long,XU Jian-ning,ZHANG Guang-yun.The Influence of Deposit Trajectories on Molding Quality in the Rapid Prototyping Based Welding[J].Journal of Shanghai Jiaotong University,2008(Z1). |
| |
| Authors: | HU Rong-hua ZHANG Hua LI Yu-long XU Jian-ning ZHANG Guang-yun |
| |
| Abstract: | Fabricated by rapid prototyping based welding parts are composed of welding seams,thus they have some advantages as high intensity,low cost etc.But till now, there are many problems not solved.The deposit trajectory is one of the reasons that affects the precision of parts.The prototyping disfigurements were analyzed and the evaluation guideline for prototyping quality was brought forward.The influence on quality were analyzed under different deposit trajectories using experimentation.According to the experiments result,the good deposit trajectory is selected. |
| |
| Keywords: | rapid prototyping based welding molding quality deposit trajectory |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
