首页 | 本学科首页   官方微博 | 高级检索  
     检索      

典型固体可燃物燃烧特性的实验研究
引用本文:刘江虹,廖光煊,范维澄,陈长坤.典型固体可燃物燃烧特性的实验研究[J].中国科学技术大学学报,2002,32(6):738-742.
作者姓名:刘江虹  廖光煊  范维澄  陈长坤
作者单位:中国科学技术大学火灾科学国家重点实验室,安徽合肥,230026
基金项目:国家重点基础研究发展规划 (2 0 0 1CB4 0 96 0 9)资助项目
摘    要:选择具有代表性的聚甲醛丙烯酸甲脂和松木两种材料,采用基于耗氧原理的燃烧热释放速率测量方法,在不同的外加热流密度作用下利用锥型量热计系统对固体可燃物的热释放速率进行测量;分析了外加热流密度对固体可燃物热释放速率、燃烧产物中CO2的浓度和烟气的温度的影响;发现固体可燃物的燃烧放热过程与它们本身的结构特性密切相关,外加热流密度对固体可燃物的热释放速率有很大的影响。

关 键 词:固体可燃物  燃烧特性  实验研究  热释放速率  锥型量热计  外加热流密度
文章编号:0253-2778(2002)06-0738-05

An Experimental Study on Burning Properties of Typical Combustibles
LIU Jiang hong,LIAO Guang xuan,FAN Wei cheng,CHEN Chang kun.An Experimental Study on Burning Properties of Typical Combustibles[J].Journal of University of Science and Technology of China,2002,32(6):738-742.
Authors:LIU Jiang hong  LIAO Guang xuan  FAN Wei cheng  CHEN Chang kun
Abstract:Cone calorimeter tests were conducted on typical combustibles, such as PMMA(polymethyl methacryle)and pine. By means of this single test method, measured properties, such as HRR and CO 2 concentration and smoke temperature are obtained under fire exposure radiation conditions. The results show that combustion state of solids is closely related with their construction and characteristics: the heat release rate curve of pine has two obvious peak values, but the heat release rate PMMA increases stably and behaves like a liquid. Exposure radiation has a great influence on combustion and heat release of solids.
Keywords:heat release rate  solid combustible  cone calorimeter
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号