首页 | 本学科首页   官方微博 | 高级检索  
     检索      

井下高压充填纤维复合防砂体的力学分析
引用本文:李金发,齐宁,周福建,李晓军,张琪,刘志良.井下高压充填纤维复合防砂体的力学分析[J].中国石油大学学报(自然科学版),2008,32(5).
作者姓名:李金发  齐宁  周福建  李晓军  张琪  刘志良
作者单位:1. 中国石油大学,石油工程学院,山东,东营,257061;中石化胜利油田分公司,滨南采油厂,山东,滨州,257600
2. 中国石油大学,石油工程学院,山东,东营,257061
3. 中国石油勘探开发研究院,北京,100083
基金项目:中石化提高采收率导向项目(2006-021)
摘    要:从纤维增强树脂涂敷砂强度的机理入手,首先对单根纤维的压应力进行力学分析,构建了单纤维微元体的压应力力学模型,然后对影响短纤维受力的因素进行分析,采用半经验法确定单向平行短纤维增强复合砂体的工程常数,对理论预测公式进行修正,并引入纤维分布方位因子,建立了考虑流体剪切冲刷的随机取向短纤维增强砂体强度的预测模型。利用该模型得到了纤维复合体极限强度与临界产量的关系,从而为优化纤维加入量以及合理控制开井后的生产制度提供了理论指导。

关 键 词:纤维  防砂  力学分析  树脂涂敷砂  高压充填

Mechanics analysis of fiber-complex sand control of downhole high-pressure packing
LI Jin-fa,QI Ning,ZHOU Fu-jian,LI Xiao-jun,ZHANG Qi,LIU Zhi-liang.Mechanics analysis of fiber-complex sand control of downhole high-pressure packing[J].Journal of China University of Petroleum,2008,32(5).
Authors:LI Jin-fa  QI Ning  ZHOU Fu-jian  LI Xiao-jun  ZHANG Qi  LIU Zhi-liang
Abstract:Considering the mechanism of fiber reinforcing resin-coated sand intensity,the compression stress on single fiber was analyzed,and the mechanical model of single fiber infinitesimal element was developed.Then,the affecting factors of stress on cut fibers were analyzed,and the theoretical forecast formula was amended on the basis of engineering constants of unidirectional parallel cut fibers reinforcement sand complex ascertained by adopting semi-thumb rule.The intensity prediction model of random orientatio...
Keywords:fiber  sand control  mechanics analysis  resin-coated sand  high-pressure packing  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号