首页 | 本学科首页   官方微博 | 高级检索  
     检索      

不同口模直径下聚合物熔体流变特性试验研究
引用本文:王敏杰,孙秀伟,刘莹.不同口模直径下聚合物熔体流变特性试验研究[J].大连理工大学学报,2010,50(1):52-57.
作者姓名:王敏杰  孙秀伟  刘莹
作者单位:1. 大连理工大学精密与特种加工教育部重点实验室,辽宁,大连,116024
2. 大连理工大学精密与特种加工教育部重点实验室,辽宁,大连,116024;唐山学院机电工程系,河北,唐山,063000
基金项目:“十一五”国家科技支撑重点计划资助项目(2006BAF04B13)
摘    要:采用双料筒毛细管流变仪,研究了口模直径从1.5 mm减小到0.5 mm时聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)、聚丙烯(PP)和高密度聚乙烯(HDPE)4种聚合物熔体的流变特性,并讨论了在口模直径为0.5 mm条件下温度对熔体剪切粘度、温度和剪切速率对熔体非牛顿指数的影响.试验结果表明,在剪切速率102~104s-1,4种聚合物熔体的剪切粘度均随剪切速率的提高而减小.PS和PMMA熔体的剪切粘度随着口模直径的减小而增大,PP和HDPE熔体的剪切粘度随着口模直径的减小而减小.随着剪切速率的提高,不同口模直径下熔体剪切粘度的差异逐渐缩小.在口模直径为0.5 mm的条件下,4种聚合物熔体的剪切粘度对温度的依赖性符合Arrhenius方程;熔体的非牛顿指数随着温度的升高而增大,随着剪切速率的提高而减小.

关 键 词:聚合物熔体  毛细管流变仪  口模直径  流变特性  非牛顿指数  

Experimental study of rheological characteristics of polymer melts under various die diameters
WANG Minjie SUN Xiuwei,LIU Ying.Experimental study of rheological characteristics of polymer melts under various die diameters[J].Journal of Dalian University of Technology,2010,50(1):52-57.
Authors:WANG Minjie SUN Xiuwei  LIU Ying
Institution:WANG Min-jie1,SUN Xiu-wei1,2,LIU Ying11.Key Laboratory for Precision & Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116024,China,2.Department of Electro-mechanical Engineering,Tangshan College,Tangshan 063000
Abstract:The rheological characteristics of four polymer melts polystyrene(PS),poly(methyl methacrylate)(PMMA),polypropylene(PP) and high density polyethylene(HDPE) were investigated using a double capillary rheometer under the die diameter from 1.5 mm to 0.5 mm.The effects of temperature on shear viscosity and the effects of temperature and shear rate on non-Newton exponent of melts were discussed when the die diameter was 0.5 mm.The results show that the shear viscosity of four polymer melts decreases with the inc...
Keywords:polymer melt  capillary rheometer  die diameter  rheological characteristics  non-Newton exponent  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《大连理工大学学报》浏览原始摘要信息
点击此处可从《大连理工大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号