|
|||||
|
|
| 加工高扭矩抛物线同步带轮滚刀齿形的研究 | |
| 引用本文： | 郭建华,王兴春,刘志誉.加工高扭矩抛物线同步带轮滚刀齿形的研究[J].齐齐哈尔大学学报(自然科学版),2002,18(4):85-87. |
| 作者姓名： | 郭建华 王兴春 刘志誉 |
| 作者单位： | 1. 齐齐哈尔大学机械系,齐齐哈尔,161006 2. 齐齐哈尔塑料二厂,齐齐哈尔,161005 3. 齐齐哈尔油漆总厂,齐齐哈尔,161002 |
| 摘 要： | 提出了高扭矩抛物线齿同步带轮滚刀齿形的设计方法。研究了不同刀具齿形加工不同齿数带轮时,在带轮齿廓上形成误差分布规律,以及最大齿形误差随齿数的变化规律; 并研究了齿形误差在带与带轮啮合传动中的影响,为工程上合理选取刀具齿形,降低带轮齿形误差,提高可加工的带轮齿数范围,提供了理论依据。 |
| 关 键 词： | 高扭矩抛物线齿带轮 齿形误差 滚刀 |
| 文章编号： | 1007-984X(2002)04-0085-03 |
| 修稿时间： | 2002年7月21日 |
The study of machining hob of parabolic tooth shape of pulley in the high torque drive |
|
| GUO Jian-hua,WANG Xing-chen,LIU Zhi-yu.The study of machining hob of parabolic tooth shape of pulley in the high torque drive[J].Journal of Qiqihar University(Natural Science Edition),2002,18(4):85-87. | |
| Authors: | GUO Jian-hua WANG Xing-chen LIU Zhi-yu |
| Institution: | GUO Jian-hua1 WANG Xing-chen2 LIU Zhi-yu3 |
| Abstract: | This paper puts forward a design method of pulley hob with parabolic tooth shape, which is used in the high torque drive. The research expresses error distributing rule along tooth configuration of pulley with different shape hob machining pulley of variation teeth number and maximum error distributing along pulleys. At the same time the paper studies the effect of tooth configuration error in the drive between synchro-belt and pulley and provide theoreics basic, in order to choose reasonably hob tooth configuration in engineering and reduce tooth error of pulley machined and improve range of pulleys machined. |
| Keywords: | high torque drive pulley with parabolic tooth shape tooth error hob |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |