| 聚丙烯酸酯涂层胶与硅橡胶的共混研究 |
| |
| 引用本文： | 华载文,尹哲.聚丙烯酸酯涂层胶与硅橡胶的共混研究[J].东华大学学报(自然科学版),1992(1). |
| |
| 作者姓名： | 华载文 尹哲 |
| |
| 作者单位： | 中国纺织大学纺织化学工程系应用化学研究室，中国纺织大学纺织化学工程系应用化学研究室 |
| |
| 摘 要： | 为改善聚丙烯酸酯类涂层胶(AR 502)的低温手感和拒水性,本文采用了 AR 502与硅橡胶(106)共混方法。着重以 SEM 法和溶解度参数法研究了二者的相容性,共混体形态结构及共混比对共混体拒水性、手感等性能的影响。在10/90～15/85(106/AR 502)共混比范围内制得了具有优良拒水性和低温柔软手感的涂层织物,其拒水性由10%提高到90%,刚度由44mm 降低到33mm。
|
| 关 键 词： | 聚丙烯酸酯 相溶性 共混物 形态结构 拒水性 硅橡胶 共混比 |
A STUDY ON BLENDS OF POLYACRYLATE COATING AGENT WITH SILICON RUBBER |
| |
| Hua Zhaiwen Yin Zhe.A STUDY ON BLENDS OF POLYACRYLATE COATING AGENT WITH SILICON RUBBER[J].Journal of Donghua University,1992(1). |
| |
| Authors: | Hua Zhaiwen Yin Zhe |
| |
| Institution: | Department of Textile Chemical Engineering |
| |
| Abstract: | In this paper a method of blending polyacrylate(AR 502)with silicon(106)was used to
improve the handle at low temperature and water-repellent property of polyacrylate coating
(AR 502).The compatibility and morphology of the blend,and the water-repellency and
handle of fabrics coated with these blends were studied emphatically by SEM and solubility
parameter methods.The effect of blend ratio on the water-repellent and handle properties
etc.of the blends were investigated as well.Coating fabrics with good water-repellency and
soft handle at low temperature were prepared within the range of(106/AR 502)blend ratio
10/90 to 15/85.The water-repellency of coated fabric was increased from 10% to 90% and
the rigidity of which was lowered from 44mm to 33mm. |
| |
| Keywords: | polyacrylate compatibility blend morphology water-repellency silicon rubber blend ratio |
| 本文献已被 CNKI 等数据库收录！ |
