| 周转轮系差速器双轴送经的余纱长度分析 |
| |
| 引用本文： | 朱苏康,刘文韬.周转轮系差速器双轴送经的余纱长度分析[J].东华大学学报(自然科学版),1996(2). |
| |
| 作者姓名： | 朱苏康 刘文韬 |
| |
| 作者单位： | 中国纺织大学纺织工程一系机织教研室，中国纺织大学纺织工程一系91级 学生 |
| |
| 摘 要： | 在阔幅织机上,以周转轮系差速器作双轴送经的方法可以通过机构自动调节来缩小两织轴的经纱张力差异。但是,机构本身的结构及其故障都会引起两织轴的余纱长度不等。以两套电子送经机构分别控制丙只织轴的送经运动,是克服余纱长度不等的措施。
|
| 关 键 词： | 送经机构 余纱长度 经纱张力 |
ANALYSIS ON THE LENGTH OF THE REST YARN ON TWO BEAMS OF USING THE LET-OFF MOTION DOUBLE BEAMS (SIDE BY SIDE) |
| |
| Zhu Sukang,Liu Wentao.ANALYSIS ON THE LENGTH OF THE REST YARN ON TWO BEAMS OF USING THE LET-OFF MOTION DOUBLE BEAMS (SIDE BY SIDE)[J].Journal of Donghua University,1996(2). |
| |
| Authors: | Zhu Sukang Liu Wentao |
| |
| Institution: | Department of Textile Technology |
| |
| Abstract: | In the wide weaving machine, the difference of warp tension on two beams are reduced by using a differential gear train of let-off motion double beams (side by side). But the structure of this let-off motion itself and its trouble can cause the difference of the length of the rest yarn on two beams.The difference of the length of the rest yarn can be overcome by the use of two sets of electronic let-off motion respectively used to control the let-off of two beams. |
| |
| Keywords: | let-off motion length of the rest yarn warp tension |
| 本文献已被 CNKI 等数据库收录！ |
