| 支持向量机在齿轮故障诊断中的应用 |
| |
| 引用本文： | 李力,张全林,李骥,余新亮.支持向量机在齿轮故障诊断中的应用[J].三峡大学学报(自然科学版),2012,34(2):63-65,75. |
| |
| 作者姓名： | 李力 张全林 李骥 余新亮 |
| |
| 作者单位： | 三峡大学机械与材料学院,湖北宜昌,443002 |
| |
| 摘 要： | 针对齿轮故障诊断中的小样本事件,采用了支持向量机（SVM）方法.采集齿轮3种典型故障（断齿、磨损、剥落）和正常状态的振动信号,提取时域指标和能量特征作为SVM输入向量,并采用交叉验证（K-CV）法优化SVM参数,最终得到的故障诊断准确率为100%.结果表明SVM是一种有效的齿轮故障诊断方法.
|
| 关 键 词： | 支持向量机 交叉验证（K-CV） 故障诊断 |
Application of SVM to Gear Fault Diagnosis |
| |
| Li Li
,
Zhang Quanlin
,
Li Ji
,
Yu Xinliang.Application of SVM to Gear Fault Diagnosis[J].Journal of China Three Gorges University(Natural Sciences),2012,34(2):63-65,75. |
| |
| Authors: | Li Li Zhang Quanlin Li Ji Yu Xinliang |
| |
| Institution: | Li Li Zhang Quanlin Li Ji Yu Xinliang(College of Mechanical & Material Engineering,China Three Gorges Univ.,Yichang 443002,China) |
| |
| Abstract: | In this paper,the support vector machine(SVM) classification algorithm has been applied to gear fault diagnosis in small samples based on vibration signals covering four working conditions,i.e.normal,broken teeth,wear and spalling.Firstly,time domain index and energy of the signals were extracted as input of SVM.Then,parameters of SVM were optimized using K-fold cross validation(K-CV) method.Finally,applied the SVM to the fault diagnosis,and the faults were recognized correctly with an accuracy of 100%.The results demonstrate that SVM is an effective method for gear fault diagnosis. |
| |
| Keywords: | support vector machine(SVM) K-fold cross validation(K-CV) fault diagnosis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
