| 插齿机静压支承所受载荷的正交试验优化设计 |
| |
| 引用本文： | 余艳波,田启华,杜义贤.插齿机静压支承所受载荷的正交试验优化设计[J].三峡大学学报(自然科学版),2013,35(2):81-84. |
| |
| 作者姓名： | 余艳波 田启华 杜义贤 |
| |
| 作者单位： | 1. 三峡大学机械与材料学院,湖北宜昌,443002
2. 三峡大学机械与材料学院,湖北宜昌 443002;水电机械设备设计与维护湖北省重点实验室(三峡大学),湖北宜昌 443002 |
| |
| 基金项目： | 国家自然科学基金项目，湖北省自然科学基金项目，水电机械设备设计与维护湖北省重点实验室开放基金项目 |
| |
| 摘 要： | 针对插齿机高速运行过程中主轴转速、弹簧回复力、静压支承面摩擦系数等可控因素对静压支承所受载荷的影响问题，基于正交试验设计方法，利用多体动力学软件，建立了插齿机主传动系统虚拟样机模型，设计了9种试验组合方案，并对这些方案进行了仿真分析．利用极差分析法和方差分析法对仿真结果进行了分析，优选出静压支承所受载荷最小的组合方案．
|
| 关 键 词： | 插齿机 主传动系统 静压支承 虚拟样机 正交试验 优化设计 |
Optimal Designs of Loads of Hydrostatic Pressure Support of Gear Shaper Based on Orthogonal Experiment |
| |
| Yu Yanbo
,
Tian Qihua
,
Du Yixian.Optimal Designs of Loads of Hydrostatic Pressure Support of Gear Shaper Based on Orthogonal Experiment[J].Journal of China Three Gorges University(Natural Sciences),2013,35(2):81-84. |
| |
| Authors: | Yu Yanbo Tian Qihua Du Yixian |
| |
| Institution: | 1,2(1.College of Mechanical & Material Engineering,China Three Gorges Univ.,Yichang 443002,China;2.Hubei Key Laboratory of Hydroelectric Machinery Design & Maintenance,China Three Gorges Univ.,Yichang 443002,China) |
| |
| Abstract: | According to the effect of spindle speed, spring force and hydrostatic supporting surface friction co- efficient on the load of hydrostatic pressure support, a virtual prototype model of the main driveline of gear shaper is established based on multi-body dynamics software; and 9 combined schemes are designed based on orthogonal experiment method. The simulation analyses of these schemes are completed. The simulation re- sult is analyzed by range analysis and variance analysis. Finally, the best combination scheme is obtained. |
| |
| Keywords: | gear shaper main driveline static pressure supporting virtual prototype orthogonal experiment optimal design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
