首页 | 本学科首页   官方微博 | 高级检索  
     检索      

硬线钢夹杂物行为
引用本文:刘志远,栾文林,王硕明.硬线钢夹杂物行为[J].河北理工学院学报,2009(1).
作者姓名:刘志远  栾文林  王硕明
作者单位:河北理工大学;冶金与能源学院;唐山钢铁公司;
摘    要:针对唐钢硬线钢冶炼的现行工艺与条件,经过系统取样、综合分析对硬线钢生产过程中非金属夹杂物类型、来源、数量及分布进行了系统研究。研究表明:铸坯总体积率为0.0625%。显微夹杂的数量平均值为16.66个/mm2,面积百分比为0.018%。铸坯中的显微夹杂是硫化物夹杂、硅酸盐夹杂物、氧化铝夹杂物。铸坯中大型夹杂物的平均值为31.5mg/10Kg。铸坯中主要的大型夹杂物是硅酸盐和铝酸盐,其次还包括少量的硫化物。铸坯中夹杂物主要来源于脱氧产物、保护渣和覆盖剂的卷入。

关 键 词:硬线钢  非金属夹杂物  体积率

Research on Inclusion in Hard Wire Steel
LIU Zhi-yuan,LUAN Wen-lin,WANG Shuo-ming.Research on Inclusion in Hard Wire Steel[J].Journal of Hebei Institute of Technology,2009(1).
Authors:LIU Zhi-yuan    LUAN Wen-lin  WANG Shuo-ming
Institution:1.College of Metallurgy and Energy;Hebei Polytechnic University;Tangshan Hebei 063009;China;2.Tangshan Iron&Steel Co.Ltd;Tangshan Hebei 063000;China
Abstract:Contraposing technics and condition of melting hard wire steel in Tangshan Iron and Steel Co.ltd,the type,resource,amount and distribution of non-inclusion are systemically studied by systemic sampling and synthetically analyzing.The result shows: Volume ratio of micro-inclusion is 0.0625%.Amount average of micro-inclusion is 16.6/mm2,area percent is 0.018%.Main micro-inclusions are sulfide inclusion,silicate inclusion and alumina inclusion.The content of macro-inclusion is 31.5 mg/10kg.Main macro-inclusion...
Keywords:hard wire steel  non-inclusion  volume ration  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号