首页 | 本学科首页   官方微博 | 高级检索  
     检索      

正交实验钢渣碳化工艺条件
引用本文:张林菊,吴昊泽,叶正茂,刘梅,丁亮,常钧.正交实验钢渣碳化工艺条件[J].济南大学学报(自然科学版),2009,23(2).
作者姓名:张林菊  吴昊泽  叶正茂  刘梅  丁亮  常钧
作者单位:济南大学,材料科学与工程学院,山东,济南,250022
基金项目:国家科技支撑计划,山东省自然科学基金,济南市科学技术发展计划重大专项基金 
摘    要:为提高钢渣碳化率及碳化后抗压强度,正交试验研究钢渣碳化工艺条件,并用X射线衍射分析(XRD)、扫描电子显微镜(SEM) 测定分析相组成及晶体形貌.结果表明:各工艺条件因素对钢渣碳化的影响程度依次为:钢渣粒度>CO2气体压力>成型压力>碳化时间.实验得出最佳工艺条件为钢渣粒度<0.9mm,成型压力=100kN,CO2气体压力=1.5MPa,碳化时间=3h.

关 键 词:碳化  工艺条件  抗压强度

Steel Slag Carbonation by Orthogonal Experiment
ZHANG Lin-ju,WU Hao-ze,YE Zheng-mao,LIU Mei,DING Liang,CHANG Jun.Steel Slag Carbonation by Orthogonal Experiment[J].Journal of Jinan University(Science & Technology),2009,23(2).
Authors:ZHANG Lin-ju  WU Hao-ze  YE Zheng-mao  LIU Mei  DING Liang  CHANG Jun
Institution:School of Material Science and Engineering;University of Jinan;Jinan 250022;China
Abstract:Steel slag has a large of free calcium oxide and magnesium oxide which affect the soundness of steel slag products,and building materials can be made from steel slag by carbonation.This paper focuses on the carbonated steel-slag brick,systematically studies the carbonated technology by orthogonal experiment.The results indicate that the order of influence degree of various factors is:particle size>CO2 gas pressure> briquetting pressure>carbonation time.The optimal carbonation condition is:the particle size ...
Keywords:carbonation  technological factor  compressive strength  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号