| 超声波功率对铸轧5182铝合金带坯组织性能的影响 |
| |
| 引用本文： | 郝建飞,李润霞,王顺成,李继林,甘春雷,宋东福.超声波功率对铸轧5182铝合金带坯组织性能的影响[J].上海理工大学学报,2017,38(4):193-197. |
| |
| 作者姓名： | 郝建飞 李润霞 王顺成 李继林 甘春雷 宋东福 |
| |
| 作者单位： | 广东省材料与加工研究所, 广东 广州 510651;沈阳工业大学 材料科学与工程学院, 辽宁 沈阳 110870,沈阳工业大学 材料科学与工程学院, 辽宁 沈阳 110870,广东省材料与加工研究所, 广东 广州 510651,广东省材料与加工研究所, 广东 广州 510651,广东省材料与加工研究所, 广东 广州 510651,广东省材料与加工研究所, 广东 广州 510651 |
| |
| 基金项目： | 广东省科技厅科技计划项目资助（2015B090926013，2015B090926007，2014B070706027，2013B091601002） |
| |
| 摘 要： | 采用超声波连续铸轧工艺制备5182铝合金带坯，研究了超声波功率对5182铝合金带坯组织性能的影响.结果表明：施加超声波振动可细化5182铝合金带坯的晶粒组织，减轻元素的偏析程度.超声波的功率越大，5182铝合金带坯的晶粒越细小，元素偏析程度越小，拉伸力学性能越高.当超声波功率为800 W时，5182铝合金带坯的抗拉强度为211.4 MPa，伸长率为18.4%，与未施加超声波振动相比，此时5182铝合金带坯的抗拉强度提高了15.8%，伸长率提高了26.0%.
|
| 关 键 词： | 5182铝合金 连续铸轧 超声振动 超声波功率 |
| 收稿时间： | 2017/5/24 0:00:00 |
The Effects of Ultrasonic Power on Microstructure and Mechanical Properties of 5182 Aluminum Alloy Strip Prepared by Continuous Casting and Rolling Process |
| |
| HAO Jianfei,LI Runxi,WANG Shuncheng,LI Jilin,GAN Chunlei and SONG Dongfu.The Effects of Ultrasonic Power on Microstructure and Mechanical Properties of 5182 Aluminum Alloy Strip Prepared by Continuous Casting and Rolling Process[J].Journal of University of Shanghai For Science and Technology,2017,38(4):193-197. |
| |
| Authors: | HAO Jianfei LI Runxi WANG Shuncheng LI Jilin GAN Chunlei and SONG Dongfu |
| |
| Institution: | Guangdong Institute of Materials and Processing, Guangzhou 510651, China;School of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China,School of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China,Guangdong Institute of Materials and Processing, Guangzhou 510651, China,Guangdong Institute of Materials and Processing, Guangzhou 510651, China,Guangdong Institute of Materials and Processing, Guangzhou 510651, China and Guangdong Institute of Materials and Processing, Guangzhou 510651, China |
| |
| Abstract: | The 5182 aluminum alloy strips were prepared by continuous casting and rolling process with ultrasonic vibration.The effect of ultrasonic power on the microstructure and mechanical properties of 5182 aluminum alloy strip was studied.The results show that the ultrasonic vibration can refine the grains size and reduce the elements segregation of 5182 aluminum alloy strip.The greater the power of the ultrasonic wave,the finer the grain size of the 5182 aluminum alloy strip,and the smaller the degree of element segregation,the higher the tensile mechanical properties.When the ultrasonic power is 800 W,the tensile strength of the 5182 aluminum alloy strip is 211.4 MPa and the elongation is 18.4%.Compared with the 5182 aluminum alloy strip prepared by continuous casting and rolling process without ultrasonic vibration,the tensile strength is increased by 15.8% and the elongation is increased by 26.0%. |
| |
| Keywords: | 5182 aluminum alloy continuous casting and rolling ultrasonic vibration ultrasonic power |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
| 点击此处可从《上海理工大学学报》下载免费的PDF全文 |
|
