首页 | 本学科首页   官方微博 | 高级检索  
     检索      

紫外衍射微透镜阵列的设计与制备
引用本文:张伟,李毅,张虎.紫外衍射微透镜阵列的设计与制备[J].上海理工大学学报,2011,33(2).
作者姓名:张伟  李毅  张虎
作者单位:1. 上海理工大学光电信息与计算机工程学院,上海,200093
2. 上海理工大学光电信息与计算机工程学院,上海,200093;上海理工大学上海市现代光学系统重点实验室,上海,200093
3. 五邑大学薄膜与纳米材料研究所,江门,529020
基金项目:国家"863"高技术研究发展计划资助项目,上海市重点学科建设资助项目,上海市人才发展基金资助计划,上海市教育委员会科学技术研究重点项目
摘    要:通过研究互相关联的光学和工艺参数,用标量衍射理论设计了用于128×1日盲型紫外探测器的衍射微透镜阵列,其工作中心波长为400 nm,单元透镜F数为.f/5,f为焦距.采用组合多层镀膜和剥离的工艺方法制备微透镜阵列,对工艺流程和制备误差进行了分析,对制备出的128×1的衍射微透镜阵列的光学性能进行测量和分析.实验结果表明,衍射微透镜阵列的衍射效率为87%.制备误差主要来自对准误差和线宽误差.紫外衍射微透镜阵列的整体性能满足了微透镜阵列与紫外焦平面阵列的单片集成要求.

关 键 词:紫外  微透镜阵列  菲涅尔波带片  组合多层镀膜与剥离

Ultraviolet diffractive microlens array design and fabrication
ZHANG Wei,LI Yi and ZHANG Hu.Ultraviolet diffractive microlens array design and fabrication[J].Journal of University of Shanghai For Science and Technology,2011,33(2).
Authors:ZHANG Wei  LI Yi and ZHANG Hu
Abstract:Diffractive microlens arrays for 128×1 solar blind UV photodetectors were designed using scalar diffraction theory by considering the interrelated optical and process parameters.The working center wavelength is 400 nm, the lens F number is f/5. The microlens arrays were fabricated by use of combination multi coatings and stripping technique, the practical processes and fabrication errors were discussed, and the optical characteristics of 128×1 diffractive microlens arrays were measured and analyzed. Experimental results show that the diffraction efficiency of the diffractive microlens array is 87%. The fabrication errors come from the alignment error and the line width error. The overall performance of ultraviolet diffractive microlens array can meet the monolithic integration requirements of the microlens array with the ultraviolet focal plane array.
Keywords:ultraviolet  microlens array  Fresnel zone plate  multi layer coating and stripping
本文献已被 万方数据 等数据库收录!
点击此处可从《上海理工大学学报》浏览原始摘要信息
点击此处可从《上海理工大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号