| 高速钻削碳纤维复合材料的钻头温度测量研究 |
| |
| 引用本文： | 涂俊翔,林 伟,楼宇舟.高速钻削碳纤维复合材料的钻头温度测量研究[J].福州大学学报(自然科学版),2014,42(5):732-736. |
| |
| 作者姓名： | 涂俊翔 林 伟 楼宇舟 |
| |
| 作者单位： | 福州大学机械工程及自动化学院,福建福州,350116 |
| |
| 基金项目： | 国家自然科学基金资助项目(51075074)；福建省自然科学基金资助项目(2013J01262) |
| |
| 摘 要： | 以钻削碳纤维复合材料为基础,研究碳纤维复合材料在高速钻削过程中切削速度和进给速度对钻头后刀面温度的影响.采用嵌入式人工热电偶的方法对硬质合金钻削刀具进行测温试验,并用LabVIEW软件获得所需的温度数据和温度曲线.测量结果表明:当进给速度恒定时,刀具的后刀面温度随主轴转速的增加而上升.当主轴转速恒定时,刀具的后刀面温度随进给速度的增加而降低.
|
| 关 键 词： | 碳纤维复合材料 高速钻削 温度测量 热电偶 |
Research on the temperature measurement of high-speed drilling carbon fiber reinforced plastics |
| |
| TU Jun-xiang,LIN Wei and LOU Yu-zhou.Research on the temperature measurement of high-speed drilling carbon fiber reinforced plastics[J].Journal of Fuzhou University(Natural Science Edition),2014,42(5):732-736. |
| |
| Authors: | TU Jun-xiang LIN Wei and LOU Yu-zhou |
| |
| Institution: | Mechanical engineering and automation of Fuzhou university,Mechanical engineering and automation of Fuzhou university,Mechanical engineering and automation of Fuzhou university |
| |
| Abstract: | Based on the drilling carbon fiber reinforced plastics, the effects of cutting speed and feed rate on the temperature of flank surface of drill during high speed drilling of carbon fiber reinforced plastics are presented. The embedded thermocouples are adopted to measure the temperature of cemented carbide cutting tools, meanwhile the LabVIEW software is utilized to get the data and curve. The investigations showed that when the feed speed is constant, the temperature of flank surface is increased with increase of spindle speed. When the spindle speed is constant, the temperature is decreased with increase of feed rate. |
| |
| Keywords: | carbon fiber reinforced plastics high-speed drilling cutting temperature measure thermocouple |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《福州大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《福州大学学报(自然科学版)》下载免费的PDF全文 |
