首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超声电机用环氧摩擦材料固化动力学研究
引用本文:陈正年,丁庆军,赵淳生.超声电机用环氧摩擦材料固化动力学研究[J].南京大学学报(自然科学版),2010(1).
作者姓名:陈正年  丁庆军  赵淳生
作者单位:南京航空航天大学精密驱动研究所;南京工程学院材料工程学院;
基金项目:国家自然科学基金(50875123);;南京工程学院重点基金(KXJ08055)
摘    要:应用差示扫描量热(DSC)技术研究了超声电机驱动用的TGDDM/MTHPA环氧摩擦材料的固化动力学.对添加了聚四氟乙烯(PTFE)、碳纤维、石墨、MoS2等填料的环氧摩擦材料固化体系在不同升温速率下得到的DSC曲线进行分析,运用Kissinger方程和Crane方程确定了体系反应级数和表观活化能,并将峰温Tp和结束温度Te外推至升温速率为零,得到理论固化温度Tcure和固化后处理温度Ttreat.结果表明反应级数与二甲基苄胺(DMBA)用量无关,约为0.90;表观活化能随着DMBA量的增加先降后升,用量为1.0%时达到最小;Tcure、Ttreat分别为130℃、153.8℃.按照上述优化配方和固化工艺制备的环氧摩擦材料装配行波超声电机(TRUMΦ-60)机械性能良好,使用寿命可达8000h以上.

关 键 词:摩擦材料  环氧树脂  固化动力学  热分析  

Studies on cure kinetics of epoxy friction material for ultrasonic motor
Chen Zheng-Nian,Ding Qing-Jun,Zhao Chun-Sheng.Studies on cure kinetics of epoxy friction material for ultrasonic motor[J].Journal of Nanjing University: Nat Sci Ed,2010(1).
Authors:Chen Zheng-Nian    Ding Qing-Jun  Zhao Chun-Sheng
Institution:1. Precision Driving Laboratory/a>;Nanjing University of Aeronautics and Astronautics/a>;Nanjing/a>;210016/a>;China/a>;2. School of Materials and Engineering/a>;Nanjing Institute of Technology/a>;211167/a>;China
Abstract:Epoxy resin matrix composite for friction material of ultrasonic motor driving was prepared by tetraglycidyl-4,4'-diaminodiphenylmethane (TGDDM)/methyl tetrahydrophthalic anhydride (MTHPA) filled with polytetrafluoroethylene(PTFE),carbon fibre,graphite,MoS2 powder et al. The non-isothermal cure kinetic of this composite was studied by means of differential scanning calorimetry (DSC). The apparent activation energy and kinetic order of curing reaction were evaluated by Kissinger equation and Crane equation,a...
Keywords:friction material  epoxy resin  cure kinetics  thermal analysis  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号