首页 | 本学科首页   官方微博 | 高级检索  
     检索      

渗氮/PVDTiN涂层对42CrMo钢组织和性能的影响
引用本文:魏仕勇,熊少阳,付青峰,陈志宝.渗氮/PVDTiN涂层对42CrMo钢组织和性能的影响[J].江西科学,2011,29(6):749-751.
作者姓名:魏仕勇  熊少阳  付青峰  陈志宝
作者单位:1. 江西省科学院应用物理研究所,江西南昌,330029
2. 上海海洋大学爱恩学院,上海,201306
基金项目:江西省科学院青年科技创新基金,江西省科学院国家预研项目
摘    要:采用渗氮+物理沉积TiN涂层的复合表面处理技术,对42CrMo钢进行表面强化处理。通过对复合表面处理后的42CrMo钢进行显微组织观察和性能测试,结果表明4,2CrMo钢表层组织和性能分别受渗氮及PVD工艺和渗碳层与涂层界面之间的结合力影响。此外,表层组织硬度呈现明显的梯度结构,外表层TiN涂层硬度最高可达2 200 HV0.1以上,此层深度在1~3μm,而中间渗氮层硬度达756.1HV0.1,深度在10 mm左右。

关 键 词:渗氮  PVDTiN涂层  42CrMo钢

Nitriding/PVDTiN Coating Affect of the 42CrMo Steel on the Organization and Performance
WEI Shi-yong,XIONG Shao-yang,FU Qing-feng,CHEN Zhi-bao.Nitriding/PVDTiN Coating Affect of the 42CrMo Steel on the Organization and Performance[J].Jiangxi Science,2011,29(6):749-751.
Authors:WEI Shi-yong  XIONG Shao-yang  FU Qing-feng  CHEN Zhi-bao
Institution:1. Institute of Applied Physics ,Jiangxi Academy of Sciences ,Jiangxi Nanchang 330029 PRC ; 2. Aian Institute,Shanghai Ocean University,Shanghai 201306 PRC)
Abstract:42CrMo steel surface has been used to evaluate wear resistance by The Nitriding +PVD-TiN coating composite of physical surface treatment technology. Through the composite surface treatment of 42CrMo steel microstructure and performance test analysis, the results showed that microstructure and performance of the 42CrMo steel is affected by the permeability Nitriding technology and microstucture carburizing layer coating and adhesive force between the interface. In addition, the surface hardness is obviously gradient mierostucture structure, the surface TiN coating hardness is maximum of 2 200 HV0.1 above,and the layer depth in 1 - 3 μm,hut hardness of the among permeability nitrogen is about 756.1 HV0.1 ,and the depth in around 10 mm.
Keywords:Nitriding  PVDTiN Coating  42CrMo Steel
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号