| 钨合金力学性能及断口形貌的温度效应 |
| |
| 引用本文： | 徐英鸽,朱金华.钨合金力学性能及断口形貌的温度效应[J].西安交通大学学报,2001,35(7):755-758. |
| |
| 作者姓名： | 徐英鸽 朱金华 |
| |
| 作者单位： | 西安交通大学 |
| |
| 摘 要： | 研究了真空退火态93WNiFe合金在10-900℃的拉伸性能、断口形貌及显微组织，研究结果表明：随着温度的升高钨合金抗拉强度逐渐下降，延伸率先上升后下降，在400℃出现峰值，断口形貌由钨颗粒解理型断裂逐渐向钨颗粒与粘结相脱开型断裂转变，钨合金抗拉强度主要受断口断裂模式的影响，而延伸率却受钨颗粒和粘结相变形的共同影响。
|
| 关 键 词： | 钨合金 力学性能 断口形貌 温度效应 |
| 文章编号： | 0253－987X（2001）07-0755-04 |
| 修稿时间： | 2000年10月31 |
Temperature Effects on the Mechanical Properties and Fracture Surfaces of
Tungsten Alloy |
| |
| Xu Yingge,Zhu Jinhua.Temperature Effects on the Mechanical Properties and Fracture Surfaces of
Tungsten Alloy[J].Journal of Xi'an Jiaotong University,2001,35(7):755-758. |
| |
| Authors: | Xu Yingge Zhu Jinhua |
| |
| Abstract: | The mechanical properties of fracture surfaces and microstructure of tungsten alloy were investigated under tension with temperature from 10 to 900 degrees. The results show that the ultimate strength decreases with the increase of temperature, the elongation increases below 400 degrees but decreases above it, and the fracture surfaces changes from tungsten pellet cleavage to detached tungsten matrix. The fracture mode influences the ultimate strength, and the deformation of tungsten pellet and matrix effect on the elongation. |
| |
| Keywords: | tungsten alloy mechanical properties fracture surfaces |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
