首页 | 本学科首页   官方微博 | 高级检索  
     检索      

汽液两相流激波升压特性的研究
引用本文:严俊杰,刘继平,林万超,陈国慧,邢秦安.汽液两相流激波升压特性的研究[J].西安交通大学学报,2001,35(5):467-470.
作者姓名:严俊杰  刘继平  林万超  陈国慧  邢秦安
作者单位:西安交通大学能源与动力工程学院,
基金项目:国家“九七三”重点基础研究发展规划资助项目(G2000026303).
摘    要:对实现汽液两相流激波升压的机理进行了详细研究,利用质量,动量和能量守恒方程建立了其升压性能的计算数学模型,在此基础上,分析了影响其性能的主要因素,并定量计算了升压效果与各影响因素之间的关系,最后,通过实验对理论模型的计算结果进行了验证,实验结果表明:汽液两相流激波升压效果随低压进口水 的增加而降低,随混合腔出口截面积的减少而增加,随高压蒸汽压力的增加和低压进口水流量的增加均有一个最佳值,本实验得到的升压比最高可达2.1:1。

关 键 词:激波  升压  汽液两相流  数学模型
文章编号:0253-987X(2001)05-0467-04
修稿时间:2000年9月8日

Research on the Performance of Steam-Water Two-Phase Flow Shock Wave Injector
YAN Junjie,LIU Jiping,Lin Wanchao,Chen Guohui,Xing Qin′an.Research on the Performance of Steam-Water Two-Phase Flow Shock Wave Injector[J].Journal of Xi'an Jiaotong University,2001,35(5):467-470.
Authors:YAN Junjie  LIU Jiping  Lin Wanchao  Chen Guohui  Xing Qin′an
Abstract:The mechanism of the steam-water two-phase flow shock wave injector is studied theoretically and experimentally. The mathematical model is given by the equations of mass, momentum and energy, the key factors influencing the injector performances are analyzed, then the relationships between the performance and these key factors are obtained. The results are tested by experimental data, and the maximum pressure of exit water is 2 5 times as much as the pressure of inlet steam.
Keywords:two-phase flow  shock wave  injector
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号