| 刷式密封迟滞特性的数值研究 |
| |
| 引用本文： | 陈春新,邱波,李军,丰镇平.刷式密封迟滞特性的数值研究[J].西安交通大学学报,2011,45(5):36-41. |
| |
| 作者姓名： | 陈春新 邱波 李军 丰镇平 |
| |
| 作者单位： | 西安交通大学叶轮机械研究所,710049,西安 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 采用非线性接触模型对刷式密封的迟滞特性及其影响因素进行了研究.采用点-面接触、梁-梁相交接触和梁-梁平行接触模拟了刷式密封中刷丝端部与转子表面接触、刷丝与背板边缘接触以及刷丝之间的接触,建立了刷式密封的非线性接触模型,并通过试验研究的刷式密封迟滞特性的数据验证了所建立模型的有效性.研究分析了刷丝径向刚度一定时,刷丝直径、刷丝长度和刷丝角度对刷式密封迟滞特性的影响规律,结果表明,刷丝端部压力计算值与理论值的比值可以更好地评定刷式密封迟滞特性的强弱.当刷丝直径保持不变时,随着刷丝角度的增加和刷丝长度的减小,刷式密封的迟滞特性越来越弱;当刷丝长度一定时,随着刷丝角度和刷丝直径的增加,刷丝的迟滞特性越来越弱;当刷丝角度一定时,不同刷丝直径和刷丝长度的刷式密封表现出相近的迟滞特性;当刷丝径向刚度一定时,刷式密封的迟滞特性强弱主要由刷丝角度决定.
|
| 关 键 词： | 刷式密封 迟滞特性 数值模拟 |
Numerical Investigations on the Hysteresis Characteristics of Brush Seals |
| |
| CHEN Chunxin,QIU Bo,LI Jun,FENG Zhenping.Numerical Investigations on the Hysteresis Characteristics of Brush Seals[J].Journal of Xi'an Jiaotong University,2011,45(5):36-41. |
| |
| Authors: | CHEN Chunxin QIU Bo LI Jun FENG Zhenping |
| |
| Institution: | (Institute of Turbomachinery,Xi′an Jiaotong University,Xi′an 710049,China) |
| |
| Abstract: | The hysteresis characteristics of brush seal and its effects were numerically investigated using nonlinear contact FEM model.A nonlinear contact model of brush seal was established using methods of node-to-surface contact,beam-to-beam contact(two beams cross each other) and beam-to-beam contact(two beams roughly parallel) simulating bristle-rotor contact,bristle-backing plate contact and inter-bristle contact respectively.The feasibility and effectiveness of the developed nonlinear contact model were demons... |
| |
| Keywords: | brush seal hysteresis characteristic numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
