| 碳化锆/锆涂层炭纤维的制备及其拉伸性能研究 |
| |
| 作者姓名： | 韩飞飞 崔正威 董志军 黄 庆 李轩科 |
| |
| 作者单位： | 武汉科技大学化学工程与技术学院 |
| |
| 基金项目： | 国家自然科学基金资助项目(50972110);湖北省自然科学基金重点资助项目(2009CDA036) |
| |
| 摘 要： | 在一定反应温度范围内以熔盐为介质通过炭纤维与金属锆反应制备出碳化锆/锆涂层炭纤维,并在反应温度为800℃时,研究反应时间对碳化锆/锆涂层炭纤维表面相组成、形貌及其拉伸性能的影响。结果表明,800℃可制备均匀致密的碳化锆/锆涂层;且随着反应时间的延长,碳化锆/锆涂层厚度略有增加;涂层后炭纤维的拉伸强度和拉伸模量比原炭纤维的相应值略有减小。
|
| 关 键 词： | 熔盐 炭纤维 碳化锆/锆涂层 拉伸性能 |
| 收稿时间： | 3/9/2012 12:00:00 AM |
Preparation and mechanical properties of zirconium carbide/zirconium coated carbon fibers |
| |
| Authors: | Han Feifei Cui Zhengwei Dong Zhijun Huang Qing and Li Xuanke |
| |
| Institution: | (College of Chemical Engineering and Technology,Wuhan University of Science and Technology,Wuhan 430081,China) |
| |
| Abstract: | The zirconium carbide/zirconium coated carbon fiber was prepared successfully in a certain reaction temperature by a molten salt reaction method.The influence of reaction time on the phase composition and surface morphology of coating and the tensile properties of composite material was studied.The results show that uniform and crack-free zirconium carbide/zirconium coating can be formed on the carbon fibers at 800 ℃,and its thickness increases slightly with increasing reaction time.In comparison to pristine carbon fibers,the tensile strength and the tensile modulus of coated carbon fibers decrease slightly. |
| |
| Keywords: | molten salt carbon fiber zirconium carbide/zirconium coating tensile property |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《》浏览原始摘要信息 |
| 点击此处可从《》下载免费的PDF全文 |
