| Ti-6Al-4V合金镀渗Ni-P合金后的组织结构与耐磨性 |
| |
| 引用本文： | 刘景榕,卢光熙.Ti-6Al-4V合金镀渗Ni-P合金后的组织结构与耐磨性[J].吉林工学院学报,1987(1). |
| |
| 作者姓名： | 刘景榕 卢光熙 |
| |
| 作者单位： | 吉林工学院材料工程系
(刘景榕)，吉林工学院材料工程系(卢光熙) |
| |
| 摘 要： | 本文对Ti-6Al-4V合全化学镀Ni-P合金后,在氩气中经1123K扩散0.5—7h试样的相组成、组织、硬度及耐磨性进行了研究。结果指出:渗层组织共分五层,其中最外层是由Ni_5P_2、Ni_3P和Ti_(1.7)P三种磷化物组成的混合物分布在Ni_3Ti基体上的复相组织,硬度高达HK900。 磨损试验在Skoda-Savin磨损试验机上进行。研究结果表明,Ti-6Al-4V经镀渗Ni-P后,从根本上消除了钛及钛合金在磨损过程中的粘着现象,从而极大地提高了耐磨性。
|
| 关 键 词： | 钛基合金 镍 涂层 扩散涂层 无电镀涂层 耐磨性 |
The Structures and Wear Resistance of Nickel Diffusion Coated Ti-6A1-4V Alloy |
| |
| Liu Jingrong Lu Guangxi,The Materials Engineering.The Structures and Wear Resistance of Nickel Diffusion Coated Ti-6A1-4V Alloy[J].Journal of Jilin Institute of Technology,1987(1). |
| |
| Authors: | Liu Jingrong Lu Guangxi The Materials Engineering |
| |
| Institution: | Liu Jingrong Lu Guangxi
The Materials Engineering Department |
| |
| Abstract: | The present paper reports the phases, structures, hardness and wear resistance of Ti-6Al-4V alloy plated by electroless Ni and then diffusion treated at 850() for 0.5-7hr.. The structure of the coating consisted of five layers. It was determined that the outmost layer was the dispersed multiphase aggregation of intermediate phases Ni3P, Ni5P2 and Ti1. 7P in a continuous Ni3Ti matrix. The hardness of this layer was about HK900.
Wear test was carried out on the Skoda-Savin type machine. The results of the wear test showed that the adhesion of Ti-6Al-4V alloy could be entirely eliminated by the mentioned coating process, accordingly the wear resistance was significantly improved. |
| |
| Keywords: | titinium-base alloy Nickel coating diffusion coating electroless plating wear resistance |
| 本文献已被 CNKI 等数据库收录！ |
