| 热力交变作用下WC-12Co硬质合金变形机理 |
| |
| 引用本文： | 黄道远,易丹青,李荐,周明哲,贾延林,陈响明.热力交变作用下WC-12Co硬质合金变形机理[J].北京科技大学学报,2010,32(1). |
| |
| 作者姓名： | 黄道远 易丹青 李荐 周明哲 贾延林 陈响明 |
| |
| 作者单位： | 1. 中南大学材料科学与工程学院,长沙,410083
2. 中南大学材料科学与工程学院,长沙,410083;株洲钻石切削刀具股份有限公司,株洲,412007 |
| |
| 摘 要： | 采用Gleeble 1500对WC-12Co硬质合金进行不同温度和应力场的压缩疲劳实验,测量疲劳前后合金硬度的变化,通过扫描电镜(SEM)、透射电镜(TEM)等手段观察其组织结构的变化并分析其变形失效机理.结果表明:随着实验温度与加载载荷的升高,WC-12Co合金硬度呈下降趋势,WC晶粒发生圆化,WC晶粒骨架的完整程度下降.WC-12Co合金的疲劳变形失效机理为:在较低变形温度和变形载荷下,塑性变形由WC相中的位错滑移和黏结相马氏体转变所提供,随着变形温度和变形载荷的升高,塑性变形则通过硬质相的层错运动和WC/WC的界面滑动形成黏结相条带来实现.
|
| 关 键 词： | 硬质合金 变形机理 层错 硬度 |
Deformation mechanism of WC-12Co alloy under thermomechanical alternation |
| |
| HUANG Dao-yuan,YI Dan-qing,LI Jian,ZHOU Ming-zhe,JIA Yan-lin,CHEN Xiang-ming.Deformation mechanism of WC-12Co alloy under thermomechanical alternation[J].Journal of University of Science and Technology Beijing,2010,32(1). |
| |
| Authors: | HUANG Dao-yuan YI Dan-qing LI Jian ZHOU Ming-zhe JIA Yan-lin CHEN Xiang-ming |
| |
| Abstract: | Compression fatigue experiments of WC-12Co cemented carbide were carried out on Gleeble 1500 under different thermomechanical conditions.The Vickers hardness of the alloy was tested,the microstructures were observed by SEM and TEM,and the deform mechanism was discussed.It is shown that with increasing experimental temperature and load,the continuity of WC skelectons is broken down,leading to the decreasing in hardness of WC-12Co alloy.The deform mechanism of WC-12Co alloy is that the alloy's plastic ability... |
| |
| Keywords: | cemented carbide deform mechanism stacking faults hardness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
