| 径向流吸附器内部结构对变压吸附制氧效果的影响 |
| |
| 引用本文： | 王浩宇,刘应书,施绍松,孟宇.径向流吸附器内部结构对变压吸附制氧效果的影响[J].北京科技大学学报,2015(2):238-242. |
| |
| 作者姓名： | 王浩宇 刘应书 施绍松 孟宇 |
| |
| 作者单位： | 1. 北京科技大学机械工程学院，北京100083; 北京联合大学生物化学工程学院，北京100023;2. 北京科技大学机械工程学院,北京,100083 |
| |
| 基金项目： | 国家高技术研究发展计划资助项目 |
| |
| 摘 要： | 建立了两塔径向流变压吸附制氧实验装置，研究了径向流吸附器的气体流动型式、外流道宽度和流道结构对制氧效果的影响。结果表明：对于变压吸附制氧，径向流吸附器采用向心流动最为合适；在实验条件下，外流道宽度减小到13 mm时，氧和氮分离效果最佳；与Z型流道相比，Π型流道结构改善分子筛的利用率，产氧效果最好。
|
| 关 键 词： | 吸附器 径向流 制氧 变压吸附 |
Influence of the structure of radial flow adsorbers on oxygen production with pressure swing adsorption |
| |
| WANG Hao-yu,LIU Ying-shu,SHI Shao-song,MENG Yu.Influence of the structure of radial flow adsorbers on oxygen production with pressure swing adsorption[J].Journal of University of Science and Technology Beijing,2015(2):238-242. |
| |
| Authors: | WANG Hao-yu LIU Ying-shu SHI Shao-song MENG Yu |
| |
| Institution: | WANG Hao-yu;LIU Ying-shu;SHI Shao-song;MENG Yu;School of Mechanical Engineering,University of Science and Technology Beijing;School of Biochemical Engineering,Beijing Union University; |
| |
| Abstract: | A radial flow pressure swing adsorption ( PSA) unit with two-tower configuration was designed for oxygen production. The influences of gas flow pattern, outer flow channel width and channel structure on oxygen production were studied by experiment. The result indicates that it is an optimal choice to use centripetal flow in the radial flow adsorber for oxygen production with PSA. Un-der the experimental condition, when the outer flow channel width decreases to 13 mm, the separation of oxygen from nitrogen is the best. A Π-shaped channel structure can better improve the utilization efficiency of molecular sieves and oxygen production compared with a Z-shaped channel. This research result provides a foundation for the application and research of a radial flow adsorber in the PSA unit for oxygen production. |
| |
| Keywords: | adsorbers radial flow oxygen production pressure swing adsorption |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
