首页 | 本学科首页   官方微博 | 高级检索  
     检索      

非圆截面管辊弯成形过程的变形和应力场的FEM模拟
引用本文:徐树成,王先进,刘才.非圆截面管辊弯成形过程的变形和应力场的FEM模拟[J].北京科技大学学报,1999,21(5):455-458.
作者姓名:徐树成  王先进  刘才
作者单位:北京科技大学材料科学与工程学院!北京,100083(徐树成,王先进),燕山大学!秦皇岛,066004(刘才)
摘    要:采用三维大变形弹塑性有限元法,考虑材料和几何双重非线性,基于Prandtl-Reuss流动规律和Mises屈服准则,对圆管的辊弯二次成形过程中金属的流动规律及其应力分布进行了模拟分析,分别得到非圆截面管辊弯成形过程中金属的流动规律及应力的信息.

关 键 词:辊弯  弹塑性有限元  金属流动  应力分布  变形
修稿时间:1999-03-14

非圆截面管辊弯成形过程的变形和应力场的FEM模拟
Xu Shucheng, WangXianjin, Liu Cai.非圆截面管辊弯成形过程的变形和应力场的FEM模拟[J].Journal of University of Science and Technology Beijing,1999,21(5):455-458.
Authors:Xu Shucheng  WangXianjin  Liu Cai
Institution:Xu Shucheng, WangXianjin, Liu Cai1)
Abstract:A simulation on metal flow rule and stress distribution of non-circular tubes in roll forming process by using 3D large deformation elastic plastic finite element method with considering of material and geometrical non-linearity is presemted. This method is based upon Prandtl-Reuss flow ruler and mises yield criterion. The simulation results of grids deformation flow pattern and stress distribution are obtained.
Keywords:roll-forming  elastic-plastic finite element  metal flow  stress distribution  deformation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号