| 极低硫钢的精炼脱硫动力学模型 |
| |
| 引用本文： | 李素芹,熊国宏,李士琦,朱荣,王新华,陈原.极低硫钢的精炼脱硫动力学模型[J].北京科技大学学报,2004,26(3):244-246. |
| |
| 作者姓名： | 李素芹 熊国宏 李士琦 朱荣 王新华 陈原 |
| |
| 作者单位： | 北京科技大学冶金与生态工程学院,北京,100083 |
| |
| 基金项目： | 国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 通过对影响脱硫反应限制性环节的分析,将持续接触和瞬时接触两种反应模式综合考虑,建立了精炼脱硫动力学模型,并通过实验室"极低硫钢精炼脱硫"实验数据对模型进行验证.结果表明,本模型的预测结果与实验结果比较吻合.
|
| 关 键 词： | 精炼 脱硫 动力学 模型 极低硫钢 精炼脱硫 动力学模型 Process Steel Refining Sulphur Model 结果比较 实验数据 预测结果 验证 实验室 综合 反应模式 接触 分析 限制性环节 脱硫反应 影响 |
| 修稿时间： | 2003年9月5日 |
Dynamic Model Applied in Ultra-low Sulphur Steel Refining Desurlfurization Process |
| |
| LI Suqin,XIONG Guohong,LI Shiqi,ZHU Rong,WANG Xinhua,CHENG Yuan Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing.Dynamic Model Applied in Ultra-low Sulphur Steel Refining Desurlfurization Process[J].Journal of University of Science and Technology Beijing,2004,26(3):244-246. |
| |
| Authors: | LI Suqin XIONG Guohong LI Shiqi ZHU Rong WANG Xinhua CHENG Yuan Metallurgical and Ecological Engineering School University of Science and Technology Beijing Beijing |
| |
| Institution: | LI Suqin,XIONG Guohong,LI Shiqi,ZHU Rong,WANG Xinhua,CHENG Yuan Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing 100083 |
| |
| Abstract: | By analyzing the bottle-neck of desulphurization reacton, a kinetic model applied in refining de-
surlfurization process was developed based on two kind of calculating reactive modes: both durative contact mode
and temporary contact mode. The results show that this model is in good agreement with the experimental data. |
| |
| Keywords: | refining desulfurization dynamic model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
