首页 | 本学科首页   官方微博 | 高级检索  
     检索      

Fe-Cr合金的钝化膜和点蚀发展模型
引用本文:李方,吴荫顺,杨德钧,张文奇.Fe-Cr合金的钝化膜和点蚀发展模型[J].北京科技大学学报,1986(1).
作者姓名:李方  吴荫顺  杨德钧  张文奇
作者单位:北京钢铁学院金属腐蚀教研室 (李方,吴荫顺,杨德钧),北京钢铁学院金属腐蚀教研室(张文奇)
摘    要:本文采用AFS和FPMA以及旋转圆盘—圆环电极等方法,对三种Fe-Cr合金在3.5%NaCl溶液中的钝化和点蚀行为进行了研究,考察了铬的作用和溶解机理,并据此提出了两种点蚀发展模型。

关 键 词:Fe-Cr合金  局部腐蚀  点蚀  钝化膜

The Possive Film and Pitting Propagation Models of Fe-Cr Alloy
Li Fang Wu Yinshun Yang Dejun Zhang Wenqi.The Possive Film and Pitting Propagation Models of Fe-Cr Alloy[J].Journal of University of Science and Technology Beijing,1986(1).
Authors:Li Fang Wu Yinshun Yang Dejun Zhang Wenqi
Institution:Li Fang Wu Yinshun Yang Dejun Zhang Wenqi
Abstract:The passivity and pitting mechanisms of Fe-Cr alloys which contain 13%Cr, 17%Cr and 28%Cr in 3.5%NaCl solution have been presented by AES, EPMA technique and rotating disc-ring electrochemical measurement, especially, the behaviour of element Cr was investigated. By experiments and analysis, the following conclusions have been obtained: (a) The most important factor that control corrosion resistance of Fe-Cr alloys is the ratio Cr/Fe in passive film. (b) For diffenent Fe-Cr alloys, dissolution of Cr within pit is different. For alloys of Fe-13Cr and Fe-17Cr, dissolution of Cr follow dissolution-deposition reaction but following adsorption-desorption reaction is occurred for Fe-28Cr alloy.(c) Based on the experimental results and analytical discussion,models of pitting propagation mechanism for Fe-13Cr, Fe-17Cr alloys and for Fe-28Cr alloy have bene proposed respectively.
Keywords:Fe-Cr alloys  localized corrosion  pitting  passive film    
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号