| 钢-铝固液相浸镀复合板的轧制处理 |
| |
| 引用本文： | 张鹏,刘汉武.钢-铝固液相浸镀复合板的轧制处理[J].北京科技大学学报,1999,21(2):179-181. |
| |
| 作者姓名： | 张鹏 刘汉武 |
| |
| 作者单位： | [1]北京科技大学材料科学与工程系 [2]东北大学压力加工系 |
| |
| 摘 要： | 研究了轧制处理后－铝固液相浸镀复合板的界面剪切力学性能，确定了压下率与界面剪切强度之间的关系，结果表明，压下率为２．７３％时，可消除由１．２ｍｍ厚０８Ａｌ钢板和１．０ｍｍ厚工业纯铝构成的２．２ｍｍ厚钢－铝固液相浸镀复合板的界面附加应力，从而获得阳大界面剪切强度为８３．５ＭＰａ。
|
| 关 键 词： | 轧制 浸镀 固液相复合板 界面剪切强度 钢－铝 |
| 修稿时间： | 1998-06-12 |
钢-铝固液相浸镀复合板的轧制处理 |
| |
| Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin,Liu Hanwu, Cui Jianzhong, Ba Limin.钢-铝固液相浸镀复合板的轧制处理[J].Journal of University of Science and Technology Beijing,1999,21(2):179-181. |
| |
| Authors: | Zhang Peng Du Yunhui Ren Xueping Kang Yonglin Liu Hanwu Cui Jianzhong Ba Limin |
| |
| Abstract: | The interfacial shear property of steel-aluminum solid to liquid immersing bonding plate after being rolled was studied and the relationship between interfacial shear strength and relative reduction was determined.The result proved that:for the bonding plate made up with 1.2mm-thick 08Al steel plate and 1.0 mm-thick aluminum layer, when the relative reduction was 2.73%,the interfacial subsidiary stress could be eliminated and thus the maximum interfacial shear strength 83.5MPa was obtained. |
| |
| Keywords: | rolling solid to liquid immersing bonding plate interfacial subsidiary stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
