| 电镀非晶态Ni-P合金的研究 |
| |
| 引用本文： | 赵国鹏,王国斌.电镀非晶态Ni-P合金的研究[J].鞍山科技大学学报,1991(3). |
| |
| 作者姓名： | 赵国鹏 王国斌 |
| |
| 作者单位： | 鞍山钢铁学院，东工表面研究所 |
| |
| 摘 要： | 采用Ni-P合金阳极在Watt型镀液中电镀,获得了高光洁度、高硬度和耐蚀的非晶态Ni-P合金镀层,建立了最佳工艺条件,并研究了温度、电流密度及镀液中H_3PO_4含量等对沉积速度,合金中磷含量,合金硬度等的影响;对Ni-P合金镀层结构的研究结果表明,采用Ni-P合金阳极,可使合金镀层具有更高的含磷量,且变化范围较小,在研究范围内获得的Ni-P合金均为非晶态结构。
|
| 关 键 词： | 电镀 阳极 Ni-P合金 非晶态 |
The Research of Electroplating Amorphous Ni-P Zallop |
| |
| Zhao Guopeng,Wang Guobin.The Research of Electroplating Amorphous Ni-P Zallop[J].Journal of Anshan University of Science and Technology,1991(3). |
| |
| Authors: | Zhao Guopeng Wang Guobin |
| |
| Institution: | Zhao Guopeng;Wang Guobin |
| |
| Abstract: | Amorphous Ni-P alloy was electrodeposited from Tatts-type plating bath. Effects of bath tempera
ture , current density, content of phosphorus acid in the bath on the deposition rate and phosphoruscontent in the deposited Ni-P alloy and the structure of Ni-P allop were discussed. Phosphorus con-tent in the deposited Ni-P allop with Ni-P allop as anode is higher and the vary range of the phos-phorus content is narrower comparing with the deposited Ni-P alloy with Pt as anode. |
| |
| Keywords: | Electroplating Anode Ni-P alloy Amorphous |
| 本文献已被 CNKI 等数据库收录！ |
|
