| 致密热解碳层的混合气体包覆工艺研究 |
| |
| 引用本文： | 朱钧国,杨冰,张秉忠,彭新立,梁彤翔,王军,徐小平.致密热解碳层的混合气体包覆工艺研究[J].清华大学学报(自然科学版),1998(5). |
| |
| 作者姓名： | 朱钧国 杨冰 张秉忠 彭新立 梁彤翔 王军 徐小平 |
| |
| 作者单位： | 清华大学核能技术设计研究院 |
| |
| 基金项目： | 国家“八六三”高技术项目 |
| |
| 摘 要： | 致密热解碳层是高温气冷堆包覆燃料颗粒的关键组成。该文介绍了在流化床包覆炉中采用丙烯（Ｃ３Ｈ６）和乙炔（Ｃ２Ｈ２）的混合气体作为反应体系的包覆工艺，以消除只用丙烯作为包覆气体时产生的热效应。讨论了包覆工艺参数（沉积温度、乙炔浓度等）对致密热解碳层的密度、沉积速率和碳利用率的影响，确定了制备致密热解碳层的最佳工艺条件。研究的结果在生产规模流化床包覆炉中得到了验证和实际应用。
|
| 关 键 词： | 高温气冷堆 包覆燃料颗粒 致密热解碳层 混合气体 热效应 流化床 化学气相沉积 镀层密度 |
Study on coating technology of gas mixture for dense pyrolytic carbon layer |
| |
| ZHU Junguo,YANG Bing,ZHANG Bingzhong,PENG Xinli,LIANG Tongxiang,WANG Jun,XU Xiaoping Institute of Nuclear Energy Technology,Tsinghua University,Beijing ,China.Study on coating technology of gas mixture for dense pyrolytic carbon layer[J].Journal of Tsinghua University(Science and Technology),1998(5). |
| |
| Authors: | ZHU Junguo YANG Bing ZHANG Bingzhong PENG Xinli LIANG Tongxiang WANG Jun XU Xiaoping Institute of Nuclear Energy Technology Tsinghua University Beijing China |
| |
| Institution: | ZHU Junguo,YANG Bing,ZHANG Bingzhong,PENG Xinli,LIANG Tongxiang,WANG Jun,XU Xiaoping Institute of Nuclear Energy Technology,Tsinghua University,Beijing 100084,China |
| |
| Abstract: | Dense pyrolytic carbon layer (PYC) is the key component of the composite coating of TRISO coated fuel particle in high temperature gas cooled reactor. This paper describes that the coating technology of using a gas mixture of propylene (C 3H 6) and acetylene (C 2H 2) in fluidized bed coating furnace was developed in order to eliminate the thermal effects of propylene decomposition. The influence of coating process parameters (deposition temperature, acetylene concentration) on coating density, deposition rate and deposition efficience are discussed. The optimum coating conditions have been obtained. The dense PYC layers fulfilling the design specification has been fabricated in a fluidized bed coating furnace. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
|
