首页 | 本学科首页   官方微博 | 高级检索  
     检索      

面内受弯玻璃板的承载及稳定性试验研究
引用本文:王元清,张恒秋,石永久.面内受弯玻璃板的承载及稳定性试验研究[J].清华大学学报(自然科学版),2006,46(6):773-776.
作者姓名:王元清  张恒秋  石永久
作者单位:清华大学,土木工程系,建筑玻璃与金属结构研究所,结构工程与振动教育部重点实验室,北京,100084
摘    要:面内受弯玻璃板的最大应力点通常出现在相对薄弱的边缘处,当缺少足够的侧向支承时,会发生整体失稳而破坏。该文在面内受弯玻璃板极限承载试验基础上,分析了这种构件的破坏过程,分析了跨高比对面内受弯玻璃板静力承载性能的影响和玻璃板的稳定问题,得到了结构的屈曲后荷载位移曲线。结果表明,面内受弯玻璃板会发生极值点失稳,其破坏由屈曲荷载控制,屈曲荷载的大小随着玻璃板高跨比的增加而呈线性增大。计算所得屈曲荷载小于试验测值。该结果为考虑稳定问题的面内受弯玻璃板极限承载力设计提供了依据。

关 键 词:玻璃结构  面内受弯  承载性能  屈曲荷载
文章编号:1000-0054(2006)06-0773-04
修稿时间:2005年7月7日

Experimental study of the loading capacity and stability of in-plane bending of a glass plate
WANG Yuanqing,ZHANG Hengqiu,SHI Yongjiu.Experimental study of the loading capacity and stability of in-plane bending of a glass plate[J].Journal of Tsinghua University(Science and Technology),2006,46(6):773-776.
Authors:WANG Yuanqing  ZHANG Hengqiu  SHI Yongjiu
Abstract:The maximum stress for in-plane bending of a glass plate usually appears around the verge area,with the glass plates losing their resistance to flipping over when the supports are inadequates.The stress response to bending loads was investigated experimentally with analyses of the buckling due to in-plane bending of glass plates to obtain the load-displacement curve after buckling.The results show that extreme-point buckling occurs with in-plane bending and dominates the plate's failure.The buckling load is approximately linearly relates to the height-span ratio of the plate.The buckling load calculated by finite element solution is less than the experimental measurements.These results provide evidence for the design of buckling loads due to in-plane bending of glass plates.
Keywords:glass structure  in-plane bending  load bearing properties  buckling loads
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号