| 轴心受压部分加劲板件稳定系数计算方法研究 |
| |
| 引用本文： | 姚行友,;郭彦利.轴心受压部分加劲板件稳定系数计算方法研究[J].宁夏大学学报(自然科学版),2014(2):136-140. |
| |
| 作者姓名： | 姚行友 ;郭彦利 |
| |
| 作者单位： | [1]南昌工程学院土木与建筑工程学院,江西南昌330099; [2]广东海洋大学工程学院,广东湛江524088 |
| |
| 基金项目： | 国家自然科学基金资助项目（51308277）;湛江市科技攻关项目（2012C3104002）;江西省教育厅科学技术研究项目（GJJ14760） |
| |
| 摘 要： | 基于能量法对冷弯薄壁型钢卷边槽形截面轴心受压构件的弹性畸变屈曲应力和半波长进行推导分析,得到相应部分加劲板件的稳定系数建议计算公式.与有限条法计算结果的对比分析表明,建议的部分加劲板件稳系数计算方法具有较高的精度和较好的通用性.在此基础上,通过简化分析给出了轴心受压构件部分加劲板件考虑畸变屈曲和局部屈曲的协同稳定系数计算方法.算例分析以及国内外的相关实验结果的验证表明,建议方法能够更好地考虑轴心受压开口截面构件畸变屈曲和局部屈曲对于构件极限承载力的影响,承载力计算结果相对于我国现行《冷弯薄壁型钢结构技术规范》(GB 50018—2002)更加准确,适用性更强.
|
| 关 键 词： | 轴心受压 部分加劲板件 畸变屈曲 能量法 稳定系数 |
Calculated Method for Stability Coefficient of Partially Stiffened Element under Axial Compression |
| |
| Yao Xingyou;Guo Yanli.Calculated Method for Stability Coefficient of Partially Stiffened Element under Axial Compression[J].Journal of Ningxia University(Natural Science Edition),2014(2):136-140. |
| |
| Authors: | Yao Xingyou;Guo Yanli |
| |
| Institution: | Yao Xingyou , Guo Yanli School of Building and Civil Engineering, Nanchang Institute of Technology, Nanchang 330099, 2. School of Engineering, Guangdong Ocean University, Zhanjiang 524088, China) |
| |
| Abstract: | The elastic distortional-buckling stress and half-wave length of cold-formed thin-walled steel members with lipped channel section under axial compression and corresponding stability coefficient of partially stiffened elements are developed based on energy method. The comparison on calculated results of stability coefficient of partially stiffened elements using developed method and Finite Strip Method show that the developed method have good precision and versatility. The stability coefficient of partially stiffened elements under axial compression considering distortional buckling and local buckling are introduced based on developed method. The developed formula has higher precision to calculate the stability coefficient of partially stiffened elements and ultimate load-carrying capacity of cold-formed thin- walled steel lipped channel axially-compressed members than technical code of cold-formed thin-walled steel structures （GB 50018——2002） according examples and test results. The developed method can consider the effect of distortional buckling and local buckling on ultimate strength of members well. |
| |
| Keywords: | axially-compression members partially stiffened elements distortional buckling energy method coefficient of buckling |
| 本文献已被 CNKI 维普 等数据库收录！ |
