首页 | 本学科首页   官方微博 | 高级检索  
     检索      

核用A-TIG焊活性剂配比及对焊缝性能影响
引用本文:张攀,王湘江.核用A-TIG焊活性剂配比及对焊缝性能影响[J].南华大学学报(自然科学版),2018,32(5):76-80.
作者姓名:张攀  王湘江
作者单位:南华大学 机械工程学院,湖南 衡阳 421001,南华大学 机械工程学院,湖南 衡阳 421001;南华大学 核设施应急安全作业技术与装备湖南省重点实验室,湖南 衡阳 421001
基金项目:南华大学研究生科学基金资助项目(2018kyz013)
摘    要:以碳钢P265GH和不锈钢321为试验对象,结果表明,在相同焊接工艺参数下,涂刷配制出的活性剂,可大大增加焊接焊缝熔深,对于板件厚度在8 mm以下时,可无需开坡口、不用填丝,一次完成焊接过程,单面焊双面成形.并对焊缝接头进行相关的物理、化学分析,得到的焊缝宏观成形良好、熔深明显较常规TIG大,微观金相组织、力学性能均满足核电安装的焊接要求.

关 键 词:活性剂配比  A-TIG  焊缝性能  碳钢和不锈钢
收稿时间:2018/3/19 0:00:00

Effect of Active Agent Ratio of Nuclear A-TIG Welding and its Effect on Weld Properties
ZHANG Pan and WANG Xiangjiang.Effect of Active Agent Ratio of Nuclear A-TIG Welding and its Effect on Weld Properties[J].Journal of Nanhua University:Science and Technology,2018,32(5):76-80.
Authors:ZHANG Pan and WANG Xiangjiang
Institution:School of Mechanical Engineering,University of South China,Hengyang,Hunan 421001,China and School of Mechanical Engineering,University of South China,Hengyang,Hunan 421001,China;Hunan Provincial Key Laboratory of Emergency Safety Technology and Equipment for Nuclear Facilities,University of South China,Hengyang,Hunan 421001,China
Abstract:Taking carbon steel P265GH and stainless steel 321 as test objects,the results show that under the same welding process parameters,the flux prepared by brushing can greatly increase the weld penetration depth.When the thickness of plate is below 8 mm,there is no need for opening groove and no wire filling.The welding process is completed once,one side welding and two sides forming.Through the physical and chemical analysis of the weld joint,the results show that the weld is formed well,the penetration is obviously larger than that of the conventional TIG,and the microstructure and mechanical properties of the weld meet the welding requirements of nuclear power installation.
Keywords:active agent ratio  A-TIG welding  weld performance  carbon steel and stainless steel
点击此处可从《南华大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《南华大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号