| Abstract: | Evaluating the recyclability of powders in additive manufacturing has been a long-term challenge. In this study, the microstructure and mechanical properties of a nickel-based superalloy fabricated by laser powder-bed fusion (LPBF) using recycled powders were investig-ated. Re-melted powder surfaces, satellite particles, and deformed powders were found in the recycled powders, combined with a high-oxygen-content surface layer. The increasing oxygen content led to the formation of high-density oxide inclusions;moreover, printing-induced cracks widely occurred and mainly formed along the grain boundaries in the as-built LPBF nickel-based superalloys fabricated using recycled powders. A little change in the Si or Mn content did not increase the hot cracking susceptibility (HCS) of the printed parts. The changing as-pect ratio and the surface damage of the recycled powders might contribute to increasing the crack density. Moreover, the configuration of cracks in the as-built parts led to anisotropic mechanical properties, mainly resulting in extremely low ductility vertical to the building direc-tion, and the cracks mainly propagated along the cellular boundary owing to the existence of a brittle precipitation phase. |
