首页 | 本学科首页   官方微博 | 高级检索  
     检索      

拱式转换层板厚对结构受力性能的影响
引用本文:梁炯丰,易萍华,李爱飞.拱式转换层板厚对结构受力性能的影响[J].东华理工大学学报(自然科学版),2012,35(2):189-192.
作者姓名:梁炯丰  易萍华  李爱飞
作者单位:东华理工大学建筑工程学院,江西抚州,344000
基金项目:江西省自然科学基金资助项目(2007GZC0841);江西省教育厅科研项目(2006308);东华理工大学校长基金科研项目(DHXK0828)
摘    要:通过分析指出了拱式转换层板厚对结构受力性能的影响.结果表明,上、下弦杆的最大弯距和最大剪力随着上层转换层板厚的增大而增大;随着下层转换层板厚的增大,上弦杆的最大弯距和最大剪力明显增大,而下弦杆的最大弯距和最大剪力不断减小;随着上、下层转换层板厚的增大,斜腹杆的最大轴力不断增加;竖腹杆的最大轴力随着上层转换层板厚的增大而增加,随着下层转换层板厚的增大而减小.

关 键 词:  转换层  性能  影响

Effect of the Plate Thickness of Arch Transfer Floor on Structure Behavior
LIANG Jiong-feng , YI Ping-hua , LI Ai-fei.Effect of the Plate Thickness of Arch Transfer Floor on Structure Behavior[J].Journal of East China Institute of Technology(Natural Science Edition),2012,35(2):189-192.
Authors:LIANG Jiong-feng  YI Ping-hua  LI Ai-fei
Institution:(Faculty of Civil and Environment Engineering,East China Institute of Technology,Fuzhou,JX 344000,China)
Abstract:The influence of plate thickness of arch transfer floor on structure behavior is analyzed.Results show that the maximum bending moment and shearing force of spandrel chord can increase with increase of upper plate thickness.With the enlargement of lower plate thickness,the maximum bending moment and shearing force of upper chord increase obviously,whereas lower one changes smaller.The maximal axial force of diagonal web member changes greater with increase of upper and lower transfer floor thickness.The maximal axial force of vertical web member shows accordance increase with thickness of upper transfer floor.However,it presents a decrease with increase of lower floor.
Keywords:arch  transfer floor  behavior  effecit
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号