首页 | 本学科首页   官方微博 | 高级检索  
     检索      

质心侧偏角相图在车辆ESC系统稳定性控制的应用
引用本文:刘伟,丁海涛,郭孔辉,邹博维.质心侧偏角相图在车辆ESC系统稳定性控制的应用[J].北京理工大学学报,2013,33(1):42-46.
作者姓名:刘伟  丁海涛  郭孔辉  邹博维
作者单位:吉林大学汽车动态仿真与控制国家重点实验室,吉林,长春130025;吉林大学汽车动态仿真与控制国家重点实验室,吉林,长春130025;吉林大学汽车动态仿真与控制国家重点实验室,吉林,长春130025;吉林大学汽车动态仿真与控制国家重点实验室,吉林,长春130025
基金项目:国家"九七三"计划项目(2011CB711205)
摘    要:通过车辆七自由度模型和Uni-tire轮胎模型,对车辆质心侧偏角相图稳定区域边界进行研究,得到边界随车速及路面摩擦因数变化的关系. 建立了基于质心侧偏角相图稳定区域的车辆电子稳定性控制系统控制方法. 通过与基于理想横摆角速度的控制方法进行比较,文中确定的质心侧偏角稳定区域边界能够对车辆稳定性控制效果进行评价,也能够对车辆轨迹进行跟随. 

关 键 词:质心侧偏角相图  稳定性评价  电子稳定性控制  七自由度模型
收稿时间:2012/5/11 0:00:00

Application of Side-Slip Angle Phasigram to Vehicle ESC System
LIU Wei,DING Hai-tao,GUO Kong-hui and ZOUBo-wei.Application of Side-Slip Angle Phasigram to Vehicle ESC System[J].Journal of Beijing Institute of Technology(Natural Science Edition),2013,33(1):42-46.
Authors:LIU Wei  DING Hai-tao  GUO Kong-hui and ZOUBo-wei
Institution:State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun, Jilin 130025, China
Abstract:Based on seven freedom vehicle model and uni-tire model, the stable zone boundary of side-slip angle phasigram was acquired. The relation of boundary with vehicle velocity and road friction coefficient was obtained. The side-slip angle phasigram stable zone boundary was applied in electronic stability control (ESC) system. The simulation was carried out under veDYNA/Simulink environment. Compared with control logic based on ideal yaw rate, the stable zone boundary method could follow the ideal trajectory obviously better. The acquired stable zone could also provide a means of evaluation in vehicle stability research.
Keywords:side-slip angel phasigram  stability evaluation  electronic stability control (ESC)  seven freedom model
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《北京理工大学学报》浏览原始摘要信息
点击此处可从《北京理工大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号