首页 | 本学科首页   官方微博 | 高级检索  
     检索      

四氯化碳催化加氢制氯仿的实验研究
引用本文:张霓,卢贵武,李春喜,王子镐.四氯化碳催化加氢制氯仿的实验研究[J].北京化工大学学报(自然科学版),2004,31(2):18-20,35.
作者姓名:张霓  卢贵武  李春喜  王子镐
作者单位:北京化工大学化学工程学院,北京,100029;北京化工大学化学工程学院,北京,100029;北京化工大学化学工程学院,北京,100029;北京化工大学化学工程学院,北京,100029
摘    要:采用浸渍法制备了Pt/活性碳毡催化剂,并在自制的高压反应釜上考察了该催化剂对四氯化碳加氢制氯仿反应的性能。实验考察了温度、压力、Pt负载量以及溶剂对四氯化碳转化率和氯仿选择性的影响,并对实验结果进行了简要讨论。在实验范围内的最佳反应条件下,即反应温度393K,氢气压力4MPa,催化剂中Pt的质量分数为0.8% ,反应时间为22h时,四氯化碳的转化率和氯仿的选择性均可达到90%以上。

关 键 词:四氯化碳  氯仿  催化加氢  加氢脱氯  Pt/活性碳毡
收稿时间:2002-09-16
修稿时间:2002年9月16日

Preparation of chloroform via catalytic hydrogenation of carbon tetrachloride
Zhang Ni,Lu Gui,wu,Li Chun,xi,Wang Zi,hao.Preparation of chloroform via catalytic hydrogenation of carbon tetrachloride[J].Journal of Beijing University of Chemical Technology,2004,31(2):18-20,35.
Authors:Zhang Ni  Lu Gui  wu  Li Chun  xi  Wang Zi  hao
Institution:College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
Abstract:Pt/active carbon fiber catalyst was prepared by an impregnation method, and its performance for transforming carbon tetrachloride to chloroform was investigated in a high pressure static reactor. The effect of temperature, pressure, load of platinum and solvent on the CCl4 conversion and selectivity to chloroform was studied experimentally and the results were discussed briefly. Under the optimum conditions of the experiment, such as, at temperature of 393K, H2 pressure of 4.0MPa, Pt load of 0.8% and reaction time of 22h,both the conversion of CTC and the selectivity to CHCl3 exceed 90%.
Keywords:carbon tetrachloride  chloroform  catalytic hydrogenation  hydrodechlorination  Pt/active carbon fiber
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京化工大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《北京化工大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号