首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钢丝绳缺陷检测励磁结构尺寸设计
引用本文:李万莉,冯文洁,李珍珍,颜崇浙.钢丝绳缺陷检测励磁结构尺寸设计[J].同济大学学报(自然科学版),2012,40(12):1888-1893.
作者姓名:李万莉  冯文洁  李珍珍  颜崇浙
作者单位:同济大学机械与能源工程学院,上海,201804
基金项目:2011BAJ02B00
摘    要:由钢丝绳缺陷类型的性质设计出钢丝绳无损检测励磁结构模型,根据磁化强度对局部缺陷型(LF)和截面积损失型(LMA)缺陷信号的影响选择钢丝绳需要磁化的磁化强度,并以钢丝绳能否磁化到一定的磁化强度作为励磁结构设计合理性的一个依据;根据励磁结构磁化回路等效模型,通过励磁结构尺寸参数设计及理论计算,分析励磁结构尺寸变化对励磁的影响,得出励磁结构的理论计算尺寸,利用得出的励磁结构尺寸进行ANSYS有限元仿真,理论计算尺寸仿真结果与钢丝绳应磁化的磁化强度有一定的差距,通过调节关键尺寸参数可以使钢丝绳达到需要的磁化强度,并以最后的尺寸作为励磁结构尺寸的设计依据.

关 键 词:钢丝绳  励磁结构  等效模型  磁化强度  尺寸  仿真
收稿时间:2011/10/19 0:00:00
修稿时间:2012/10/11 0:00:00

Dimension Design of Excitation Structure for Wire Rope Nondestructive Testing
LI Wanli,FENG Wenjie,LI Zhenzhen and YAN Chongzhe.Dimension Design of Excitation Structure for Wire Rope Nondestructive Testing[J].Journal of Tongji University(Natural Science),2012,40(12):1888-1893.
Authors:LI Wanli  FENG Wenjie  LI Zhenzhen and YAN Chongzhe
Institution:College of Mechanical Engineering, Tongji University, Shanghai 201804, China;College of Mechanical Engineering, Tongji University, Shanghai 201804, China;College of Mechanical Engineering, Tongji University, Shanghai 201804, China;College of Mechanical Engineering, Tongji University, Shanghai 201804, China
Abstract:Wire rope nondestructive testing excitation structure model is established according to the characters of wire rope defect. The value of magnetization intensity was determined by the influence of magnetization intensity to localized fault (LF) and loss of metallic cross sectional area (LMA) defection signals. Meanwhile, whether the rope can be magnetized to a certain degree was regarded as a standard for a rational design judgement. Based on the equivalent circuit model of excitation structure, parameters of excitation structure size were obtained, and then an analysis was made of the impacts of the excitation structure size variation to excitation, as a result, the size of the excitation structure was obtained. A simulation of the excitation structure of finite element by ANSYS shows that there is a gap between the theoretical calculation dimension and the magnetized intensity, an ideal value of intensity can be achieved by adjusting the key dimension values, and the last dimension values provide a reference for the excitation structure dimension design.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《同济大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《同济大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号